Instruction Manual for JVC GR-DV5000AG:
USING THE REMOTE CONTROL UNIT
This document also applies to:
Chapter Summary:
The Full-Function Remote Control Unit can operate A Infrared beam transmitting window this camcorder from a distance as well as the basic Transmits the beam signal...operations (Playback, Stop, Pause, Fast-Forward and...
The following buttons are available only when the...
Rewind) of your VCR...It also makes additional...
camcorder’s Power Switch set to “PLAY......
playback functions possible...pg...58...
|
|
Instruction Manual for JVC GR-DV4000 / GR-DV5000
Users also looked at:
When shooting again after playing back a...
During recording, a time code is recorded on the tape...61 – 64), time code is necessary...19) in the following cases...
partway through the tape......
recorded tape......
Frames (25 frames = 1 second...
When shooting using a partially recorded tape...When shooting on a blank portion located...
Display...
Frames are not displayed during recording......
opening/closing the cassette holder cover......
When shooting again after shooting a scene then...
shooting......
When power shuts off during shooting...When a tape is removed and re-inserted during...
Minutes Seconds...
EXECUTE CANCEL...
image again and change the number......
images......
for the desired number of prints......
To Reset The Number Of Prints...
indication (00), and press it......
To cancel selection, select “RETURN...The number of prints is reset to 0 for all still...
|
This "Instruction Manual" also applies to the following products:
