User Guide for Sony CCD-TRV428:
Using zoom
This document also applies to:
Chapter Summary:
When the CAMERA mode is selected, you can choose zoom to magnification levels greater than 20 times, and from that point activate the digital zoom ([D ZOOM], p...47...Occasional use of the zoom is effective, but use it sparingly for best results......
1 cm (approx...1/2 inch...
80 cm (approx...2 5/8 feet...
The minimum distance required between your camcorder and the subject to get a sharp focus in that position of the lever......
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
Press SEARCH M...on the Remote Commander repeatedly to select [PHOTO SEARCH......
If a tape has a blank section between recorded sections, the Photo search function may not work correctly......
Playback of the photo starts automatically...Each time you press the button, the previous or the next photo will be searched for and displayed......
Press...previous)/> (next) on the Remote Commander to select the photo for playback......
You can locate the still image you have recorded on a tape......
When you record You cannot record software on your camcorder that contains copyright control signals for copyright protection of software......
When labeling the cassette...
Hi8 system...
Press END SEARCH to go to the end of the recorded section before you begin the next recording in the following cases: – You have ejected the cassette during recording...You have played back the tape...If there is a blank section or discontinuous signals on your tape, re-record from the beginning to the end of the tape as described above......
|
This "User Guide" also applies to the following products:
