User Guide for Sony CCD-TRV428:
Viewing pictures recorded on a tape
This document also applies to:
Chapter Summary:
Make sure you have a recorded cassette inserted into your camcorder...When you want to play back the recorded picture on your TV, see page 39...You can control playback using the Remote Commander......
Performing Easy Handycam operation, even first time users can play back easily...For details, see page 36......
Slide the POWER switch repeatedly to select the PLAY/EDIT mode......
Press (rewind) to go to the point you want to view......
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
To prevent accidental erasure...
After using the cassette...
To prevent a blank section from being made on the tape...
This video system has been developed to enable digital recording to Hi8 /Digital8 video cassette...The recording time when you use your Digital8 system camcorder on Hi8 / standard 8 mm tape is half the recording time when using the conventional Hi8 /standard 8 mm system camcorder...120 minutes of recording time becomes 60 minutes in the SP mode...
Copyright signal...
If the cassette you play back on your camcorder contains copyright signals, you cannot copy it to a tape in another video camera connected to your camcorder......
When you play back...
You can use standard 8 mm and Hi8 , Digital8 video cassettes on your camcorder......
and are...
This Hi8 system is an extension of the standard 8 mm system, and was developed to produce higher quality pictures...You cannot play back a tape recorded in the Hi8 system correctly on video recorders/ players other than a Hi8 video recorder/player......
|
This "User Guide" also applies to the following products:
