User Guide for Sony CCD-TRV428:
Using the (LCD SET) menu – LCD B.L./LCD
This document also applies to:
Chapter Summary:
COLOR, etc......
You can select the items listed below in the LCD SET menu...To select these items, see “Changing the menu settings” (p...43......
The default settings are marked with G...The settings you can adjust vary depending on the power mode of your camcorder...The screen...
LCD SET LCD BR I GHT LCD B...L...LCD COLOR...
LCD BRIGHT...
See page 16 for details......
LCD B.L......
You can adjust the brightness of the LCD screen’s backlight...The recorded picture will not be affected by this setting......
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
Connect your camcorder to the LINE IN input on the VCR using the A/V connecting cable...Set the input selector on the VCR to LINE......
Red...
Black...
A/V connecting cable (supplied...
To connect to a TV without audio/video input jacks...
Signal flow...
When there is an S video jack on the device to be connected, connect the S video plug to that jack instead of using the yellow video plug...The audio will not be output when you connect with the S video plug alone...Pictures can be reproduced more faithfully with this connection......
VCRs or TVs...
A/V OUT jack...
Connect your camcorder to a TV using the supplied A/V connecting cable as shown in the following illustration...12...To copy to another tape, see page 63......
Yellow...
When your TV is connected to a VCR...
When your TV is monaural (When your TV has only one audio input jack...
Connect the audio plug of the A/V connecting cable to the left (white) input jack of your TV......
For TRV128/228/328/428: Use a NTSC system RFU adaptor (optional...Refer to the operating instructions of your TV and the RFU adaptor......
|
This "User Guide" also applies to the following products:
