User Guide for Sony CCD-TRV428:
Connecting to a VCR
This document also applies to:
Chapter Summary:
You can create a copy of the picture recorded on your camcorder on other recording devices (p...For TRV260/265, you can also record the picture from a VCR to a tape on your camcorder (p...Connect your camcorder to a VCR as shown in the following illustration......
VCRs...
Connecting with an i.LINK cable...
i.LINK cable (optional...
A/V OUT...
i.LINK jack...
DV Interface...
b Notes on the A/V connecting cable...
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
Slide the POWER switch while pressing the green button......
To set the counter to 0:00:00, press COUNTER RESET (p...93......
Date/time and camera settings data (p...37) will not be displayed during recording......
D Tape counter (hour: minute: second...
Remove the lens cap...Pull the lens cap string down and attach it to the grip belt......
Your camcorder is set to the standby mode......
The indicated time may not be correct depending on the environment of use...When you opened or closed the LCD panel, it takes about 1 minute to display the correct remaining battery time......
This appears after you insert a cassette and record for a while...This appears after a while when you set the POWER switch to CAMERA and insert a cassette......
Slide the POWER switch until the CAMERA lamp lights up......
F Hi8 format...
|
This "User Guide" also applies to the following products:
