User Guide for Sony CCD-TRV428:
Troubleshooting
This document also applies to:
Chapter Summary:
If you run into any problem using your camcorder, use the following table to troubleshoot the problem...If the problem...
persists, remove the power source and contact your Sony dealer...ss:ss” is displayed on the LCD screen or the viewfinder, the self-diagnosis display function is activated...See page 79 for details......
Overall operations...
Symptom Cause and/or Corrective Actions...
The power does not turn on......
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
TRV265...
Turn the SEL/PUSH EXEC dial to select...
You can adjust the angle and brightness of the LCD panel to meet various recording situations......
SEL/PUSH EXEC dial...
z Tips...
LCD SET), then press the dial......
Press MENU......
MENU...
Adjust the brightness of the LCD screen with the SEL/PUSH EXEC dial, then press the dial......
Open the LCD panel 90 degrees to the camcorder, then rotate it to the desired position......
To adjust the brightness of the LCD screen...
Even when there are obstructions between you and the subject, you can check the subject on the LCD screen during recording by adjusting the angle of the LCD panel......
Maximum 180 degrees...
Turn the SEL/PUSH EXEC dial to select [LCD BRIGHT], then press the dial (p...53......
If you rotate the LCD panel 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out...The recorded picture will not be affected by this setting...59......
|
This "User Guide" also applies to the following products:
