User Guide for Sony CCD-TRV428:
Warning indicators and messages
This document also applies to:
Chapter Summary:
Self-diagnosis display/Warning indicators...
If indicators appear on the screen, check the following...See the page in parentheses for details......
Indication Cause and/or Corrective Actions...
ss : ss/E:ss : ss (Self- diagnosis display...
Some symptoms can be fixed by yourself...If the problem persists even after you tried a couple of times, contact your Sony dealer or local authorized Sony service facility...04:ss...
|
|
User Guide for Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV328 / CCD-TRV428 / DCR-TRV260 / DCR-TRV265
Users also looked at:
The exposure is adjusted automatically in the default setting......
To fast forward or rewind...
or tape counter (hour: minute: second...
If you use a standard 8 mm tape, be sure to play back the tape on your camcorder...Mosaic noise may appear when you play back the standard 8 mm tape on other camcorders (including another DCR- TRV260/TRV265......
Indicators displayed during playing back...
To adjust the volume...
To review movies on the viewfinder...
Press either of the two buttons on VOLUME...When you close the LCD panel, sound is turned off...To turn the volume down :To turn the volume up...
To pause...
60min 0:00:00:00...
Performing Easy Handycam operation, even first time users can play back easily...For details, see page 36......
60min 0:00:00...
E Hi8 format...
Press (pause) during playback...Press (pause) or (play) to restart the playback...Playback stops automatically when pause mode continues for a few minutes......
|
This "User Guide" also applies to the following products:
