User Guide for Sony DVP-S325:
Receiver (Amplifier) Hookups
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
This connection is for listening to the sound through speakers connected to a receiver...Refer to the instructions supplied with the component to be connected......
Audio connecting cord (not supplied) (1...
White (L...
Red (R) Red (R...
S video cord (supplied) (1...
When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White...Be sure to make connections firmly to avoid hum and noise......
 |
User Guide for Sony DVP-S325Users also looked at:
Less than 0.0025...
More than 100 dB (DVD) More than 98 dB (CD...
Mass (appr ox...
4-pin mini DIN...
Harmonic distortion...
16 W...
The signals from LINE OUT (AUDIO) connectors are measured...When you play the PCM sound tracks with 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL, COAXIAL) are converted to 48 kHz (sampling frequency......
Supplied accessories...
W ow and flutter...
Wave length: 660 nm...
See page 7......
75 ohms terminated...
Design and specifications are subject to change without notice......
LINE OUT (AUDIO...
Signal format system...
Outputs and inputs...
PAL/(NTSC...
Load impedance...
2 Hz to 44 kHz (±1 dB)* DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB...
Power r equir ements...
5% to 90...
Power consumption...
5 ˚C to 35 ˚C...
Output level...
Optical output connector...
Frequency r esponse...
DIGITAL OUT (COAXIAL...
Jack type...
Less than detected value (±0.001% W PEAK...
75 ohms, sync negative 75 ohms terminated...
|