User Guide for HP J5730: 

Set your language and country/region

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: The language and country/region setting determines which language the HP All-in-One uses to show messages on the display...Usually, you set the language and country/region when you first set up the HP All-in-One...However, you can change the setting at any time by using the following procedure...... To set your language and country/region 1...2...This selects Preferences and then selects Set Language & Country/Region......


User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788

Users also looked at:

Replace the print cartridges Print a self-test report Clean the print cartridges Clean the print cartridge contacts... Repeat steps 1 and 2 for the tri-color print cartridge on the left side...If the self-test report shows a problem, clean the print cartridges...If you are still experiencing problems with printing, determine which print cartridge is experiencing the problem and replace it...... To troubleshoot print cartridges 1...Make sure the plastic tape has been removed...Then push the print cartridge forward until it clicks into the socket...... For more information, see... If you are experiencing problems with printing, you might have a problem with one of the print cartridges......

The default fax confirmation setting is Off...This means that the HP All-in-One will not print a confirmation report for each fax sent or received...A confirmation message indicating whether a fax was successfully sent appears briefly on the display after each transaction......

This "User Guide" also applies to the following products: