User Guide for HP J5730: 

Fax setup

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: In this section, you will learn how to set up the HP All-in-One so that faxing works successfully with equipment and services you might already have on the same phone line as the HP All-in-One...... You can also use the Fax Setup Wizard (Windows) or Fax Setup Utility (Mac) to help you quickly set up some important fax settings such as the answer mode and fax header information...You can access the Fax Setup Wizard (Windows) or Fax Setup Utility (Mac) through the software you installed with the HP All-in-One...After you run the Fax Setup Wizard (Windows) or Fax Setup Utility (Mac), follow the procedures in this section to complete your fax setup......


User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788

Users also looked at:

Chapter 4 (continued... Off... Recommended Auto Answer setting... None...On... A shared voice and fax line and no answering machine...... Distinctive ringing service...On... Equipment/services sharing your fax line... You have a shared phone line in which you receive both voice and fax calls... The HP All-in-One will not automatically answer calls...If the HP All-in-One detects fax tones on the line, the HP All-in-One receives the fax...If the answering machine answers a voice call, the answering machine records the incoming message...... You might use this setting if the majority of calls on this phone line are voice calls and you rarely receive faxes...... On... Refer to the table below to determine how you should answer incoming fax calls based on your home or office setup...Then, look up the appropriate setting in the second column...The third column describes how the HP All-in-One answers incoming calls...... An answering machine and a shared voice and fax line...... Voice mail service provided by your telephone company...... The HP All-in-One automatically answers all incoming calls...Make sure the ring pattern the phone company set for your fax line matches the Distinctive Ring setting on the HP All-in-One...... You have a separate phone line on which you receive only fax calls... The HP All-in-One automatically answers all incoming calls using the Rings to Answer setting......

This "User Guide" also applies to the following products: