User Guide for HP J5730: 

Select your fax setup case

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: Now that you have answered all the questions about the equipment and services that share the phone line with the HP All-in-One, you are ready to choose the best setup case for your home or office...... From the first column in the following table, choose the combination of equipment and services applicable to your home or office setting...Then look up the appropriate setup case in the second or third column based on your phone system...Step-by-step instructions are included for each case in the sections that follow......


User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788

Users also looked at:

3.3 mm (0.13 inch... To achieve this margin setting on a computer running Windows, click the Advanced tab in the print driver, and select Minimize Margins...... 1.8 mm (0.07 inch... A4... A5... 4) Bottom margin... 3) Top margin... If you are using the duplexer (available with some models), the minimum top and bottom margins must match or exceed 12 mm (0.47 inch...... 6 mm (0.24 inch... 1) Left margin... U.S...Letter... The document margins must match (or exceed) these margin settings in portrait orientation...... B5... U.S...Executive... 2 mm (0.12 inch... Media... 16.5 mm (0.65 inch... 2) Right margin... U.S...Legal...

Print specifications... 3...Include the following items in the box... System requirements... Scan specifications...

If the DSL modem is not properly grounded, it can create noise on the phone line...Phone lines with poor sound quality (noise) can cause faxing problems...You can check the sound quality of the phone line by plugging a phone into the telephone wall jack and listening for static or other noise...... I am setting up the HP All-in-One on a shared voice/fax line with a computer dial-up modem and voice mail service, and the computer has only one phone port......

This "User Guide" also applies to the following products: