User Guide for HP J5730:
Case C: Set up the HP All-in-One with a PBX phone system or...
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
If you are using either a PBX phone system or an ISDN converter/terminal adapter, make sure you do the following...
If you are using either a PBX or an ISDN converter/terminal adaptor, connect the HP All-in-One to the port that is designated for fax and phone use...Also, make sure that the terminal adapter is set to the correct switch type for your country/region, if possible......
Some ISDN systems allow you to configure the ports for specific phone equipment...For example, you might have assigned one port for telephone and Group 3 fax and another port for multiple purposes...If you have problems when connected to the fax/phone port of your ISDN converter, try using the port designated for multiple purposes; it might be labeled "multi-combi" or something similar......
 |
User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788Users also looked at:
You can set the paper size on the HP All-in-One...The paper size you select should match what is loaded in your input tray......
To set the paper size from the HP Photosmart Studio (Mac) Software 1...In the Tasks area, double-click Make Copies...From the Paper Size pop-up menu, choose the paper size......
To set the paper size from the control panel 1...Press until the appropriate paper size appears...Press Start Copy Black or Start Copy Color......
To forward faxes from the HP Photosmart Studio (Mac) Software 1...From the pop-up menu, choose Fax Forward...When you are finished, click Apply or OK......
Choose On-Print & Forward to print a backup copy of your received fax on the HP All-in-One while forwarding the fax to another number...Press OK...When power is restored to the device, the Fax Forwarding setting is still On......
To forward faxes from the control panel 1...2...This selects Advanced Fax Setup and then selects Fax Forwarding Black Only......
HP recommends that you verify the number you are forwarding to is a working fax line...Send a test fax to make sure the fax machine is able to receive your forwarded faxes......
Press until On-Forward or On-Print & Forward appears, and then press OK...Choose On-Forward if you want to forward the fax to another number without printing a backup copy on the HP All-in-One......
Medium...
Fax speed setting...
v.17 (14400 baud...
If you use one of the following, setting the fax speed to a slower speed might be required...
v.34 (33600 baud...
FCC statement...
Notice to users in Japan...
Regulatory model identification number...
|