User Guide for HP J5730:
Case K: Shared voice/fax line with computer dial-up modem...
This document also applies to:
Chapter Summary:
If you receive both voice calls and fax calls at the same phone number, use a computer dial-up modem on the same phone line, and subscribe to a voice mail service through your telephone company, set up the HP All-in-One as described in this section......
Figure 4-12 Example of a parallel splitter...
Figure 4-13 Back view of the HP All-in-One...
|
|
User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788
Users also looked at:
If you turn on the Auto Answer setting, you can specify how many rings should occur before the HP All-in-One automatically answers the incoming call......
To set the number of rings before answering from the control panel 1...This selects Basic Fax Setup and then selects Rings to Answer...Press OK to accept the setting......
Related topics Set the answer mode...
to change...
For example, set your answering machine to a low number of rings and the HP All-in-One to answer in the maximum number of rings...If the HP All-in-One detects fax tones, the HP All-in-One will receive the fax...If the call is a voice call, the answering machine will record the incoming message......
The Rings to Answer setting is important if you have an answering machine on the same phone line as the HP All-in-One, because you want the answering machine to answer the phone before the HP All-in-One does...The number of rings to answer for the HP All- in-One should be greater than the number of rings to answer for the answering machine......
|
This "User Guide" also applies to the following products:
