User Guide for HP J5730:
Text and symbols
This document also applies to:
Chapter Summary:
You can use the control panel keypad to enter text and symbols when you set up speed dial entries and the fax header information......
You can also enter symbols from the keypad when you dial a fax or phone number...For example, if you enter a dash in the fax number, the HP All-in-One will pause before dialing the remainder of the number...A pause is useful if you need to access an outside line before dialing the fax number......
|
|
User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788
Users also looked at:
c...Plug the power cord back into the HP All-in-One......
d...Turn on the HP All-in-One by pressing the Power button......
Be prepared to describe your problem in detail...Have your serial number and service ID ready......
Related topics • Print a self-test report...
b...Unplug the power cord from the back of the HP All-in-One......
2...Reset the HP All-in-One...
To find support and warranty information, go to the HP website at www.hp.com/support...If prompted, choose your country/region, and then click Contact HP for information on calling for technical support...Check the HP website for updated information or troubleshooting tips for the HP All-in-One......
c...Make a color copy to have available as a sample printout......
a...The HP All-in-One is plugged in and turned on......
Software programs from other companies might be included with the HP All-in-One...If you experience problems with any of those programs, you will receive the best technical assistance by calling the experts at that company......
|
This "User Guide" also applies to the following products:
