User Guide for HP J5730:
Load full-size paper
This document also applies to:
Chapter Summary:
You can load many types of letter, A4, or legal paper into the input tray of the HP All-in- One......
To load full-size paper 1...Remove the output tray......
2...Slide the paper-width guide to its outermost position......
Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: • Make sure it is free of rips, dust, wrinkles, and curled or bent edges...Make sure all the paper in the stack is the same size and type......
|
|
User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788
Users also looked at:
40 10 N/A...
30 10 N/A...
Legal paper...
20 lb...paper) (20 lb...paper...
Maximum capacity...Output tray capacity is affected by the type of paper and the amount of ink you are using...HP recommends emptying the output tray frequently......
Labels N/A 20 20 N/A...
20 to 24 lb...75 to 90 gsm...
4 x 6 inch photo paper...
15 10 N/A...
Type Paper weight Input tray1 Output tray2...
8.5 x 11 inch photo paper...
Transparency film N/A 25 25 or fewer N/A...
Plain paper...
up to 110 lb...index (200 gsm...
N/A 40 20 N/A...
up to 100 up to 50 up to 20...
16 to 24 lb...60 to 90 gsm...
up to 100 up to 50 up to 35...
up to 145 lb...236 gsm...
Document feeder tray...
You are trying to increase the size of an original that is too small......
The printout is blank...
The original is larger than the paper in the input tray......
You are trying to make a borderless copy of an original that is too small......
The image is cropped when I make a borderless copy...
Use photo paper to make borderless copies......
|
This "User Guide" also applies to the following products:
