User Guide for HP J5730: 

Load index cards

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: You can load index cards into the input tray of the HP All-in-One to print notes, recipes, and other text...... To load index cards in the input tray 1...Insert the stack of cards, print side down, into the far-right side of the input tray...Do not overload the input tray; make sure the stack of cards fits within the input tray and is no higher than the top of the paper-width guide...... Load 10 x 15 cm (4 x 6 inch) photo paper Set the copy paper type...


User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788

Users also looked at:

The last time the HP All-in-One was used, it was not turned off properly...If the HP All-in-One is turned off by turning off the switch on a power strip or by using a wall switch, the device can be damaged...... The HP All-in-One is not connected to the computer...... Communication test failed... The following is a list of power- and connection-related error messages... Communication test failed HP All-in-One not found Improper shutdown Two-way communication lost... Two-way communication lost... The USB cable is not plugged in properly...... If the HP All-in-One is not properly connected to the computer, communication errors can occur...Make sure the USB cable is securely connected to the HP All-in-One and the computer, as shown below...... Improper shutdown... Press the Power button located on the control panel of the HP All-in-One to turn the device on and off...... HP All-in-One not found...

The HP All-in-One software could not open or save the file......

This "User Guide" also applies to the following products: