User Guide for HP J5730: 

Print from a software application

This document also applies to:


Looking for a manual? Find it here...


Chapter Summary: Most print settings are automatically handled by the software application...You need to change the settings manually only when you change print quality, print on specific types of paper or transparency film, or use special features...... To print from a software application 1...Select the orientation...Change the print settings for each option in the pop-up menu, as appropriate for your project......


User Guide for HP J5730 / J5740 / J5750 / J5780 / J5785 / J5788

Users also looked at:

The Lighter / Darker setting applies to black and white faxes only, not color... You can change the contrast of a fax to be darker or lighter than the original...This feature is useful if you are faxing a document that is faded, washed out, or handwritten...You can darken the original by adjusting the contrast...... To change the Lighter / Darker setting from the control panel 1...Load your originals print side up into the document feeder tray...If you are sending a single-page fax, such as a photograph, you can also load your original print side down on the glass...... In the Fax area, press Menu...Press The indicator moves to the left or right as you press an arrow button...Make sure your original is loaded on the glass, and then press 1 to select Yes...... NOTE: faxes......

The HP All-in-One software could not open or save the file......

This "User Guide" also applies to the following products: