User Guide for Nikon S560:
Setting the Flash Mode
This document also applies to:
Chapter Summary:
Press m (flash mode......
The flash menu is displayed......
Use the multi selector to choose the desired flash mode and press k......
The icon for the selected flash mode is displayed at the top of the monitor......
D will disappear after a few seconds regardless of the...
Photo info option (A 120......
If a setting is not applied by pressing k within a few seconds, the selection will be cancelled......
|
|
User Guide for Nikon S560
Users also looked at:
Auto (default setting...
Use with the flash mode......
Note on Preset Manual...
The effects of the selected option can be previewed in the monitor...At settings other than Auto, the icon for the current setting is displayed in the monitor (A 6......
Preset manual...
Cloudy...
White balance Au Auto Preset manual Daylight Daylight Incandescent Incandescent Fluorescent Fluorescent Exit...
The camera zooms in......
Press k......
Place a white or gray reference object under the lighting that will be used during shooting......
Regardless of the flash mode selected, the flash will not fire when k is pressed in step 5...Therefore, the camera cannot measure a value for preset manual for when the flash is used......
Preset Manual...
Reference object frame...
Daylight...
Frame the reference object......
manual in the White balance menu, and...
|
This "User Guide" also applies to the following products: