User Guide for Toshiba 52XV545U:
Setting the HDMI™ audio mode
This document also applies to:
Chapter Summary:
To set the HDMI audio mode...
From the Audio menu, highlight Audio Setup and press T......
Press B or b to select HDMI 1 Audio and then press...
C or c to select the HDMI 1 audio mode (Auto...
Digital, or Analog...Auto is the recommended...
mode.) See “Connecting an HDMI or DVI device to the HDMI input” (- page 16......
Auto HDMI 1 Audio...
Language English...
Mode Description...
When viewing the HDMI 1 input, if digital audio from the HDMI input is available, it will be output...If not, the TV will automatically detect and output analog audio from the PC Audio input......
|
|
User Guide for Toshiba 42XV545U / 46XV545U / 52XV545U
Users also looked at:
These functions depend on the devices connected......
If a REGZA LINK device with HDMI switching capability (e.g...Audio Receiver) is connected to the HDMI input, you can select another REGZA LINK device that is connected to the master HDMI device using the TV’s INPUT button...See page 42 for details......
52XV545U_EN.book Page 60 Monday, August 4, 2008 10:54 AM...
If the device does not respond to the remote...
Some newer VCRs respond to either of two codes...These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control......
have entered the correct code......
p) operate your device...If some keys are not...
button blinks 3 times......
Every time you change the batteries you will need to reprogram the remote control......
Find the code for your device brand in the remote control device code table on pages 26–32...If more than one code is listed, try each one separately until you find one that works......
Press the applicable mode select button (CABLE...
control, repeat steps 3 and 4 using another code......
|
This "User Guide" also applies to the following products:
