Labeling the video input sources

Users also looked at:

SAT, DVD, or VCR/PVR), until the mode select... While holding down E, press the five-digit device code for your device...... button will blink one long blink...... To control the TV, press the “TV” mode select button...... have entered the correct code...... will blink twice...... Point the remote control at the device and press p to test the code... control, repeat steps 3 and 4 using another code...... If an invalid code is entered, the mode select... Every time you change the batteries you will need to reprogram the remote control...... all necessary keys on the TV remote control (in addition to... Some newer VCRs respond to either of two codes...These VCRs have a switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does not respond to the codes for your VCR brand, set the switch to the other position (“VCR1” or “VCR2”) and reprogram the remote control......