User Guide for Panasonic DMR-ES15:
Frequently asked questions
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Set up Page...
Do the Audio/Video cables need to be connected to the TV in order to see the Menus...
If your television does not have AUDIO/VIDEO terminals, an RF modulator is necessary...Consult your local dealer for more information......
What equipment is necessary to play multi channel surround sound...
You can play DVD-Video multi channel surround by digitally connecting an amplifier equipped with a Dolby Digital or DTS decoder...This unit plays DVD-Audio in 2 channels...You cannot play multi channel surround sound......
 |
User Guide for Panasonic DMR-ES15Users also looked at:
Connection with a television and cable box or satellite receiver...
Round) 75 Ω coaxial cable...
Insert fully, with this side facing up......
Cable from wall or antenna signal...
This unit VCR...
AUDIO R...
UHF Television...
AC power supply cord (Included) Connect only after all other connections are complete......
To enjoy higher picture quality...
Cable from wall or antenna signal...
Red White Yellow...
To household AC outlet (AC 120 V, 60 Hz...
The picture and sound signal from this unit does not go through the RF OUT terminal to the television...Make sure you connect one of the following terminals on this unit to the television: the AUDIO/VIDEO OUT terminal, the S VIDEO OUT terminal or the COMPONENT VIDEO OUT terminal......
Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 Ω coaxial cable to the antenna terminals on the equipment (television etc...Refer to other equipment’s operating instructions......
Red...
75 Ω coaxial cable (Included...
These terminals can be used for either interlace or progressive output (Ô page 44) and provide a purer picture than the S VIDEO OUT terminal...Connect to terminals of the same color......
|