Antenna Connection

Users also looked at:

Press the Remote Control to test the component...If the procedure was... Confirm that the external component is plugged in and on...... The step and set mode will start from the current device (not the beginning of the list, except for the first time...... PIP SWAP SPLIT MOVE... This procedure searches all codes and is called the “sequence method... Repeat the above steps until the component code is found...It may take many attempts before the correct code is found...... After the code is found, press ACTION to store the code...... Press POWER and ACTION together, for at least 5 seconds...After 5 seconds, all the illuminated mode keys will begin to flash...Release the POWER and ACTION key...... Press to move forward to the next code, or to move backward...... successful, the component will turn on......