User Guide for Vizio VU42LF:
Connecting an external Receiver/Amp
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Turn off the power to the LCD HDTV and Receiver/Amp...Then press the MENU button on the remote control to open the On-Screen Display (OSD) menu...Press the on the remote control to select OFF so that the sound from the LCD HDTV will now be routed through your Receiver/Amp system...
Note: a) b...
Refer to your Receiver/Amp user manual to select the corresponding audio input...The audio output is not amplified and cannot be connected directly to external speakers...
 |
User Guide for Vizio VU42LFUsers also looked at:
If your VCR does not respond, try all the codes for your VCR brand...If the codes do not work, or your brand is not listed, see “Searching for Component Codes.” Sometimes a code listed will only include limited functions...Try other codes that may include more functionality...
Manually turn on the VCR...If the code is accepted, the LED flashes twice after the last digit is entered...The VCR will turn off...
N 31.500...
720x400 70...
31.46 70.08 N...
800x600 60...
P 78.750...
640x480 75...
37.5 75.00 N...
1024x768 75...
V.Freq (Hz...
Resolution...
P 49.500...
N 25.175...
1024x768 60...
P 56.250...
60.0 75.03 P...
800x600 75...
31.5 59.94 N...
47.7 60.00 P...
48.4 60.01 N...
N = Negative, P = Positive, * = Primary (Native) Mode...
1360x768 60...
H.Sync...
53.7 85.06 P...
P 28.320...
V.Sync...
N 65.000...
P 40.000...
46.9 75 P...
Refresh (Hz...
Pixel Freq (MHz...
37.9 60.317 P...
If connecting to a PC through the RGB PC input, set the TV timing mode to VESA 1360x768 at 60Hz for best picture quality (refer to the graphic card’s user guide for questions on how to set this timing mode...Please see the table below for the factory preset resolutions...
|