Quick Start for Panasonic TH-50PX80:
First Time Setup
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
First time setup” is displayed only when the TV is turned on for the first time after the power cord is inserted into a wall outlet and when “Auto power on” (p...24-25) is set to “No......
Turn the TV On with the POWER button...
TV) (Remote...
Be sure to select “Home” (Normal display mode...
Please select your viewing environment......
Home Store...
select...
ok...
This setting will be skipped from next time...In case you select “Store” by mistake, unplug the TV and plug it again...This selection screen is displayed when “Store” is selected......
 |
Quick Start for Panasonic TH-42PX80 / TH-50PX80Users also looked at:
If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the suggested check...If this does not solve the problem, please contact your local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV......
Check the settings of the recorder...For details, read the manual of the recorder......
a certain time in SD mode......
Change settings of Closed Caption (CC...p...34...
Neither image nor sound is produced...
Check the position, direction, and connection of the antenna......
Check Picture menu (p...22) Check the cable connections...Check that the correct input has been selected......
The screen saver is activated if the TV unit is not operated for...
A pixel or luminescent spot can occasionally be missing in plasma displays...Not a faulty symptom...
The function to prevent “Image retention” is activated...Not a faulty symptom...
Check the channel settings...p...32) Check the antenna cables......
Are the speakers’ cables connected correctly...p...22...
No sound is produced...
Is the AC power cord plugged into the outlet...22) and volume...Check that the correct input has been selected......
|