User Guide for HP M1522n:
Install the product on a network
This document also applies to:
Mid-range product with average feature set.
Price: $289.00 - $485.00
View more...
Looking for a manual? Find it here...
Chapter Summary:
In this configuration, the product is connected directly to the network and can be configured to allow all computers on the network to print directly to the product......
This mode is the recommended network configuration for the product......
Before turning on the product, connect the product directly to the network by inserting a network cable into the product network port......
2...Turn on the product, wait 2 minutes, and then use the control panel to print a configuration page......
 |
User Guide for HP M1522n / M1522nfUsers also looked at:
Incorrect changes to the link speed setting might prevent the product from communicating with other network devices...Changes can cause the product to power cycle...Changes should be made only while the product is idle......
3...Use the arrow buttons to select Link speed, and then press OK......
Load paper and print media...
The setting must match with the network product to which you are connecting (a network hub, switch, gateway, router, or computer......
Special paper or print media guidelines...
4...Use the arrow buttons to select one of the following settings......
5...Press OK...The product will power cycle......
6 Paper and print media...
Configure trays...
Understand paper and print media use...
Supported paper and print media sizes...
Fax Receive Log...View all of the recent faxes that have been received by the product......
To add an individual contact to the speed-dial list, select the row of the speed dial number that you want to specify...Type the fax number in the Fax number window...Click Add......
|