User Guide for Mio C230:
Performing the Initial Start Up
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
1 Slide the ON/OFF switch to the ON position...
Always leave the ON/OFF switch in the ON position for normal operation...
2 Your device turns on...
Tap and hold the centre of the target...When the target moves to another position, tap and hold the centre of the new target...Repeat each time to complete the calibration process...
The “Change Language” screen appears...select the desired language...Then, tap the...
 |
User Guide for Mio C230Users also looked at:
When you next briefly press the power button, the system resumes...You will either be back to where you left off or see the Home screen...
For normal operation, turn off the device by briefly pressing the power button...The device enters a suspended state...
Your device has a slot where you can insert an optional SD/SDHC (Class2) /MMC storage card...
To use a card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device...
2 Maintenance enance...
To remove a card, first make sure that no application is accessing the card, and then slightly push the top edge of the card to release it and pull it out of the slot...
To protect your device against sudden surges in current, connect the car charger only after the car engine has been started...
USA Federal Communications Commission Radio Frequency Interference Statement...
|