User Guide for JVC LT-42XM48:
HDMI Size
This document also applies to:
Chapter Summary:
The HDMI Size option can only be selected in the External Input menu when an HDMI 480p picture signal is being input to the HDMI terminal...There are two types of HDMI 480p picture signals: 640x480 and 720x480...If the displayed picture is slightly shifted, the position can be adjusted by selecting Auto, Size1 or Size2......
To "External Input" To enter To "HDMI Size" To enter To select "Auto", "Size1" or "Size2...
|
|
User Guide for JVC LT-37X688 / LT-37XM48 / LT-42X688 / LT-42X788 / LT-42XM48 / LT-47X788
Users also looked at:
To "Initial Setup" To enter To "Set Lock Code" To operate (Password input screen will appear...
When a viewer attempts to watch a blocked channel, this message appears...
Set Clear...
Initial Setup > Set Lock Code...
Channel guard and V-Chip settings are protected by a four-digit lock code...You may change the code to any four-digit number you wish...To change the lock code, follow the steps below......
This channel is locked by channel guard...No......
After a power interruption you must reset the lock code......
No......
To set the password, use the 10 keypad...
The Set Lock Code screen will appear...
Channel Guard Message...
This programming exceeds your rating limits...Please enter lock code by 10 key pad to unlock it......
Write your lock code number down and keep it hidden from potential viewers......
The channel cannot be accessed until the correct code is entered......
|
This "User Guide" also applies to the following products:
