Weak Signal

This document also applies to:

JVC LT-42XM48

JVC LT-37XM48

JVC LT-37X688

Looking for a manual? Find it here...

Chapter Summary: This OSD appears when the digital channel that you have selected is too weak to receive or no signal is being detected for that channel...It also appears when Noise Muting is On and no signal is being received from an external source...... No Program or Weak Signal...

User Guide for JVC LT-37X688 / LT-37XM48 / LT-42X688 / LT-42X788 / LT-42XM48 / LT-47X788

Users also looked at:

Page 39 - Software Version

To "Initial Setup" To enter To "Software Version" To enter Press the OK button to close... You can confirm the Software Version...... If the channel that you have on does not receive a signal for more than one minute, the blinking text “No Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the countdown...If no signal is being received within 10 minutes, the TV shuts itself off...... Off Auto Shut Off...

Page 29 - Noise Muting

Noise muting will not work when you operate channel summary...... Language English... Front Panel Lock Off...

This "User Guide" also applies to the following products: