User Guide for Canon 500D:
Timer-controlled Shooting
This document also applies to:
Chapter Summary:
Two types of timer shooting are available where the camera automatically takes shots at a specified time or a specified number......
Timer Shooting...
You can automatically take a shot when the specified time elapses......
The [Timer shooting settings] dialog box appears......
Enter a delay time and click the [Start] button......
Enter a value between 0 seconds and 99 minutes and 59 seconds in one-second increments...The shot is taken when the specified time elapses......
|
|
User Guide for Canon 1000D / 1D / 1D Mark III / 1Ds / 40D / 450D / 500D / 50D / 5D / 5D Mark II
Users also looked at:
Do not pull on the cable; hold the plug and pull out......
Disconnect the cable from the camera and computer......
Turn the camera’s power switch to < OFF......
Click the [Quit] button......
The window closes and EU exits......
Remote shooting...
To shoot with the timer...
To register a personal white balance in the camera p.19...
To set My Menu and apply to the camera p.22...
p.48...
To start up the Original Dat software from EU...
p.40...
To apply a Picture Style file to the camera p.18...
To shoot by controlling the camera from a computer (Remote Live View shooting...
To download images using a third-party card reader p.9...
To shoot with the Wireless File Transmitter WFT-E2/E2A, E3/E3A or E4/E4A and check the images in real time...
p.37...
Downloading images from your camera to a computer...
To change the aspect ratio and shoot p.35...
To download to a computer selected images only p.7...
To shoot by operating the camera p.36...
To set the camera owner’s name, copyright notice and date/time...
|
This "User Guide" also applies to the following products:
