User Guide for Panasonic AG-DVX100A:
Charging the internal battery
This document also applies to:
Chapter Summary:
The date and time are stored in the memory using the internal battery...Recharge it by following the steps below...Upon completion of charging, reset the date and time......
1 Connect the AC adapter to the camera...
recorder......
2 Return the viewfinder to its original position......
3 Leave the camera recorder’s POWER switch...
at the OFF position......
4 Keep the camera recorder like this for about...
|
|
User Guide for Panasonic AG-DVX100
Users also looked at:
The mode is switched between recording and recording pause......
FRONT...
For setting the lighting of the tally lamps......
REC LAMP (Camera...
CHAIN...
BOTH...
BEEP SOUND (Camera...
OWhen the cassette tape has not been...
HOUR METER (Camera) (VCR...
USER FILE (Camera) (VCR...
The component for backup purposes is not controlled......
the camera recorder...
TIME SHIFT (Camera) (VCR...
In 1-hour increments...
For setting the internal calendar of the camera recorder......
Beep tone sounds twice...
to ON...
When the camera recorder is left on standby for about 5 minutes in the shooting pause mode, it is automatically set to the tape protection mode...The camera recorder’s power is set to the OFF mode...The cylinder head is set to the stop mode......
For setting the control method when backup shooting is to be performed by connecting a component for backup purposes to the DV connector......
|
This "User Guide" also applies to the following products:
