User Guide for Panasonic AG-DVX100A:
RECORDING SETUP screen
This document also applies to:
Chapter Summary:
REC SPEED (Camera) (VCR...
AUDIO REC (Camera) (VCR...
MIC ALC (Camera...
MIC GAIN 1 (Camera...
MIC GAIN 2 (Camera...
1394 TC REGEN (VCR...
TC MODE (Camera) (VCR...
For selecting the recording time mode......
SP...
SP (standard play) mode...
LP...
LP (long play) mode...
For selecting the system for converting the recording to PCM audio...12-bit/32kHz 16 bit : 16-bit/48kHz...
For setting the mic level automatic control function to ON or OFF......
|
|
User Guide for Panasonic AG-DVX100
Users also looked at:
6 mm (XSB4+6FZ...
O If video signals have been input to both the...
if video signals are not input to the S-VIDEO IN/OUT connector or VIDEO IN/OUT connector except when performing audio dubbing......
Microphone holder...
connected to the DV connector, do not apply a strong load from outside...Doing so may damage the connector......
on the microphone shoe of the camera recorder, use the accessory microphone holder and microphone holder adapter......
When an external component is to be...
are being recorded, do not stop the signal output at the external component side or disconnect any of the cables...It may not be possible for the component to be recognized when recording is resumed......
When connecting an audio component, set...
OWhen signals from an external component...
connected and its video and audio signals are to be input to the camera recorder, connect the camera recorder to the output connectors on the external component......
|
This "User Guide" also applies to the following products:
