User Guide for Panasonic AG-DVX100A:
Connecting external components
This document also applies to:
Chapter Summary:
When an external component is to be...
connected and its video and audio signals are to be input to the camera recorder, connect the camera recorder to the output connectors on the external component......
Conversely, when an external component is...
to be connected and the video and audio signals of the camera recorder are to be input to the component, connect the camera recorder to the input connectors on the external component......
|
|
User Guide for Panasonic AG-DVX100
Users also looked at:
The camera recorder’s settings can be changed to suit the scenes to be shot or what is to be recorded using the setting menus......
Error message...
spotlights on the screen......
Message that appears while adjustment is underway...
LOW LIGHT...
Message that appears upon completion of the adjustment...
AWB Ach OK...
LEVEL OVER...
OEnsure that there are no high-luminance...
2 Place a white pattern in a location subject to...
adjustment...The following messages appear on the screen...
OWhen the ATW (Auto Tracking White...
White balance and black balance...
The WHITE BAL switch can be set to the A or B position and white balance values here can be stored in the memory...Set the switch to the position (A or B) where the white balance adjustment value is to be stored, and press the AWB button......
Reduce the amount of light...Alternatively, lower the gain......
If one of the above error messages has appeared, implement the suggested countermeasure, and then try adjusting the white balance again...If the error message persists even after repeated attempts at adjustment, consult your dealer......
|
This "User Guide" also applies to the following products:
