User Guide for Panasonic AG-DVX100A:
Parts and their functions
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
1POWER switch...
Move this switch while pressing the lock release button......
POWE R...
ON...
OFF...
Lock release button...
2START/STOP button...
When this button is pressed in the camera mode, shooting can be started or stopped...Operation is switched between the camera mode and VCR mode using the CAMERA/VCR button......
3EJECT switch...
To open the cassette holder, slide this switch in the direction of the arrow while pressing the lock release button...Do not operate the switch while recording is in progress...The cassette holder will open but recording will continue, so external light and/or dust will adversely affect the tape......
 |
User Guide for Panasonic AG-DVX100Users also looked at:
4 PUSH-SET...
When the camera recorder remains in the playback pause or recording pause mode for more than 5 minutes, it is automatically set to the stop mode in order to protect the tape...However, if it remains in the playback pause mode when the temperature is low, the stop mode may be established sooner......
OPERATION lever...
Tape protection mode...
Set the POWER switch to ON, and press the CAMERA/VCR button to switch to the VCR mode...Normal playback operations can be performed using the OPERATION lever or accessory wireless remote control unit......
For setting the beep tone to ON or OFF......
The component for backup purposes is controlled using the START/STOP button on the camera recorder...The images shot by the camera recorder are recorded by the component for backup purposes...However, the camera recorder does not record the images......
BOTH...
Operations performed by the remote control unit are not accepted......
For setting the recording operation to be performed by the component for backup purposes when the START/STOP button on the camera recorder has been pressed......
OWhen a problem has occurred in the...
The front tally lamp (by the microphone) lights......
The tally lamps do not light......
EXT...
REMOTE (Camera) (VCR...
The component for backup purposes is not controlled......
|