User Guide for Panasonic AG-DVX100A:
Condensation
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
How to tell when condensation has formed inside and what to do about it...
If, after the camera recorder’s power has been turned on, the condensation display symbol flashes, it means that condensation has formed inside the camera recorder...If this happens, the power will be automatically turned off after several seconds...Take the following action......
1Remove the cassette......
No other functions will work...Depending on the degree of condensation, it may not be possible to eject the cassette, either...In this case, wait two or three hours, and then try ejecting the cassette......
 |
User Guide for Panasonic AG-DVX100Users also looked at:
Mark...
OTurn the lens hood clockwise, and secure it...
OPosition the lens hood so that its mark is...
Mounting the lens hood...
Fixing screw...
hood counterclockwise to remove......
facing upward, and fit the hood onto the lens......
using the fixing screw......
OLoosen the fixing screw, and turn the lens...
Removing the lens hood...
DATE/TIME (Camera) (VCR...
AUTO...
For selecting what is to be displayed in the viewfinder and on the LCD monitor......
EVF MODE (Camera) (VCR...
display of the...
The brightness of the LCD monitor’s images is adjusted......
For setting the audio level meter display to ON or OFF......
TAPE•BATTERY (Camera) (VCR...
For setting the amount of information to be displayed in the viewfinder and on the LCD monitor...See page 53...
SELF SHOOT (Camera...
For setting the level of the zebra pattern leaning to the left and displayed in the viewfinder and on the LCD monitor......
For setting the remaining tape amount and remaining battery charge displays to ON or OFF......
LCD BACKLIGHT (Camera) (VCR...
NORMAL MIRROR...
OFF, PARTIAL, ALL...
EVF BRIGHTNESS...
When ON is set, the camera information (such as camera shake correction, iris value and gain value) is displayed when the tape is played back......
|