User Guide for Panasonic AG-DVX100A:
Display-related problems
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Something is wrong with the time code display......
When the reverse slow playback mode is set, the count shown on the time code display becomes inconsistent; however, this is normal and not indicative of malfunctioning......
The remaining tape display does not match the actual amount of tape remaining......
The remaining tape is not displayed accurately with continuous shooting sessions lasting less than 30 seconds...A display which is two to three minutes less than the actual tape remaining time sometimes appears......
 |
User Guide for Panasonic AG-DVX100Users also looked at:
OWhile intermittent recording is in progress...
1 Set the shooting mode for intermittent...
recording using the INTERVAL REC item on the setting menu RECORDING SETUP screen...See page 44...
the remaining tape amount is not displayed......
recording starts in the shooting mode for intermittent recording......
5 When the OPERATION lever is tilted in the...
direction, “I –” blinks, and intermittent recording is set to the temporary stop status......
mode has been established, the INTERVAL REC item cannot be set......
item......
4 When the START/STOP button is pressed...
no other operations are accepted......
OIf the progressive 24P mode or 24P (ADV...
3 Set the standby time using the INTERVAL...
the mode in which images are shot at fixed intervals, and the frame-by-frame shooting mode......
2 Set the recording time using the REC TIME...
TIME item......
Even when the intermittent recording mode has been set, it will be returned to OFF when the power is turned off......
the same conditions as the lighting source of the subject, zoom in on it, and fill the whole screen with white...A white object (white cloth or white wall) near the subject may be used instead of the white pattern......
|