User Guide for Samsung SC-MS15R:
Setting the NTSC/PAL
This document also applies to:
Chapter Summary:
You can set the Miniket Photo's output properly when playback on a TV...
Select <NTSC/PAL> by moving the joystick left / right......
Sets to NTSC standard......
Sets to PAL standard...Refer to page 146...
Recording and playback settings should be identical...NTSC recordings are properly played back in NTSC...
mode......
If recording and playback settings are different, displayed video may not be perfect......
|
|
User Guide for Samsung SC-MS10 / SC-MS11 / SC-MS15
Users also looked at:
VCR...
Line Output Line Input...
5...Turn on the VCR and set the <Source> to the external input source where you connected the Miniket Photo......
Miscellaneous Information : Printing Photos...
2...Connect the other end of the cable to the VCR set by matching the colors of the terminals......
TV...
Audio Audio...
4...Turn on the TV and set the <Source> to the external input source......
When connected to other devices with the Audio/Video cable, no screen is displayed on the LCD monitor......
You can play back photo files as well as the movie files......
1...Connect the provided AV cable to the [Earphones and AV jack] of the Miniket Photo......
VCR0...
5...VCR...
AUDIO (L) (R...
Video In / Video Out0...
3...Connect the Audio/Video Cable from TV Input Terminals In to the Video Output Terminals......
You can connect your Miniket Photo to a TV set through a VCR...
|
This "User Guide" also applies to the following products:
