Operation Manual for Sharp UX-B20:
Using TEL Mode
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
ENTER (2-5) (4...
Enter the desired number of rings (any number from 2 to 5......
TRANSACTION...
Example: 3 rings...
If you are using Distinctive Ring, the machine will answer calls after two rings regardless of the above setting......
Using TEL Mode...
To select TEL mode, press...
the feeder) until the arrow in the display points to TEL......
When the reception mode is set to TEL, you must answer all calls (even faxes) by picking up the machine’s handset or an extension phone connected to the same line......
 |
Operation Manual for Sharp UX-B20Users also looked at:
Look for a break in the diagonal line above the bars...A break indicates...
Aligning the print cartridge...
CLEAN NOZZLES...
If print quality is not satisfactory, first try aligning the print cartridge......
If the bottom diagonal line still has breaks, repeat Steps 1 through 4 to run the nozzle test again...Run the test a third time if necessary......
clogged nozzles......
To dissolve dried ink, hold the damp...
continue with Step 7......
The machine prints a test pattern similar to the one shown in the following...
If the print quality is satisfactory after running the nozzle test three times...
Dampen another section of clean cloth with water, and gently wipe the contacts and the gold-colored area around the contacts......
If print quality is still not satisfactory after aligning the print cartridge, follow these steps to clean the print cartridge nozzles......
The fax machine uses a lithium battery to retain settings and information programmed in the machine when the power is turned off...With the power kept continuously off, the life of the battery is about 5 years...Do not try to replace it yourself......
|