Operation Manual for Sharp UX-B20:
Improving Print Quality
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Aligning the print cartridge...
If print quality is not satisfactory, first try aligning the print cartridge......
Make sure that paper is loaded before beginning this procedure......
In this example, “15” comes closest to forming a straight line......
After printing the alignment page the display shows...
CLEAN NOZZLES...
Cleaning the print cartridge nozzles...
If print quality is still not satisfactory after aligning the print cartridge, follow these steps to clean the print cartridge nozzles......
 |
Operation Manual for Sharp UX-B20Users also looked at:
in the power cord (see page 10...Plugging in the power cord without doing so may damage the machine......
Connecting the Power Cord...
CHECK CARTRIDGE” normally appears in the display the first time you plug in the machine...This message appears until you install the print cartridge......
Do not plug the power cord into any other kind of outlet...This will damage...
Plug the power cord into a 120 V, 60 Hz, grounded AC (3-prong) outlet......
If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for the power and telephone lines...Surge protectors can be purchased at most telephone specialty stores......
The machine does not have a power on/off switch, so the power is turned on and off by simply plugging in or unplugging the power cord......
Make sure you have removed all of the packing tape before plugging...
the machine and is not covered under the warranty......
to that point in memory...After transmission, the memory will be cleared and you can transmit the remaining pages...You will also need to transmit the page which was being scanned when the memory filled up......
|