Operation Manual for Sharp UX-B20:
Attachments
This document also applies to:
Looking for a manual? Find it here...
Chapter Summary:
Attachments...
Points to keep in mind when setting up...
Do not place the machine in direct sunlight......
Do not place the machine near heaters or air conditioners......
Keep dust away from the machine......
Keep the area around the machine clear......
About condensation...
If the machine is moved from a cold to a warm place, it is possible that condensation may form on the scanning glass, preventing proper scanning of documents for transmission...To remove the condensation, turn on the power and wait approximately two hours before using the machine......
 |
Operation Manual for Sharp UX-B20Users also looked at:
polled...
the display......
Dial the fax machine that you wish to poll using one of the following methods...
Pick up the handset (or press...
and dial the full number...Wait for the fax...
Polling allows you to call another fax machine and have it send a document (previously loaded in its feeder) to your machine without assistance from the operator of the other machine...
polling request......
answerback tone......
Your machine is not capable of being polled......
Before polling, make sure the other machine is set up to receive your...
Enter the full number using the numeric keys......
To use the polling function, the other machine must be capable of being...
Reception will begin......
Polling is useful when you want the receiving fax machine, not the transmitting fax machine, to bear the cost of the call......
If you used the handset, replace it when POLLING appears in the display......
or until the name (or number) of the other party appears in...
Polling (Requesting a Fax Transmission...
LINE ERROR Transmission or reception was not successful...Press...
The cartridge is nearly empty (approximately one eighth of the ink remains......
|