Reviews: Before loading MultiView, if you are using the CM17A Firecracker Interface and MR26A PC Receiver, shut down any programs that utilize a communications port (comport/serial port) to avoid any possible conflicts during the configuration process (i.e...If you have the CM19A PC Transceiver, then you need to configure Firecracker as "Disabled, no transmitter" and "Disabled, no receiver...The CM19A is a USB device, will work like the CM17A and MR26A together, and cannot be identified on a serial port...The motion detection feature of MultiView can be used only if an MR26A PC Receiver or CM19A USB Transceiver is connected to the computer (if you have a CM19A, skip steps 2 through 7...If you want MultiView to wait until motion is detected before capturing images, click the Sleep Until Motion Detected button...
Retrevo's Recommendation: Average Buy for Everyone