Datamax E-4204 printer
http://www.datamaxcorp.com/...8231601_h.pdf
Table of contents
View All 
• Overview »
• Who Should Use This Manual »
• General Conventions »
• Computer Entry and Display Conventions »
• Typical Data Flow Sequence »
• Control Code Command Functions »
• Introduction »
• Attention-Getters »
• Immediate Command Functions »
• SOH # Reset »
• (Display-Equipped Models only) »
• SOH A Send ASCII Status String »
• SOH a Send ASCII Extended Status String »
• SOH B Toggle Pause »
• SOH C Stop/Cancel »
• (Non-Display Models only) »
• SOH E Send Batch Remaining Quantity »
• SOH e Send Batch Printed Quantity »
• SOH F Send Status Byte »
• System-Level Command Functions »
• STX A Set Time and Date »
• STX a Enable Feedback Characters »
• STX B Get Printer Time and Date Information »
• STX c Set Continuous Paper Length »
• STX E Set Quantity For Stored Label »
• STX e Select Edge Sensor »
• STX F Form Feed »
• STX f Set Form Stop Position (Backfeed Command) »
• STX G Print Last Label Format »
• <STX>G »
• STX I Input Image Data »
• <STX>J »
• STX K Extended System-Level Commands »
• STX k Test RS-232 Port »
• STX L Enter Label Formatting Command Mode »
• STX M Set Maximum Label Length »
• STX m Set Printer to Metric Mode »
• STX n Set Printer to Imperial Mode »
• STX O Set Start of Print (SOP) Position »
• STX o Cycle Cutter »
• STX P Set Hex Dump Mode »
• STX p Controlled Pause »
• STX Q Clear All Modules »
• STX q Clear Module »
• STX R Ribbon Saver On/Off »
• STX r Select Reflective Sensor »
• STX S Set Feed Speed »
• STX T Print Quality Label »
• STX t Test DRAM Memory Module »
• STX U Label Format String Replacement Field »
• STX V Software Switch Settings »
• <STX>v »
• STX W Request Memory Module Information »
• STX w Test Flash Memory Module »
• STX X Set Default Module »
• STX x Delete File from Module »
• STX Y Output Sensor Values »
• STX y Select Font Symbol Set »
• STX Z Print Configuration Label »
• STX z Pack Module »
• Extended System-Level Command Functions »
• Memory Configuration (Non-Display Models only) STX »
• Empty Sensor Calibration (Non-Display Models only) STX K}E »
• Manual Media Calibration (Non-Display Models only) STX K}M »
• Quick Media Calibration (Non-Display Models only) STX K}Q »
• STX KaR Read Data from RFID Tag »
• STX Kb Backfeed Time Delay »
• STX KC Get Configuration »
• STX Kc Configuration Set »
• Database Configuration (Non-Display Models only) STX KD »
• STX Kd Set File as Factory Default »
• STX KE Character Encoding »
• Select Factory Defaults (Display-Equipped and EX2 Models... »
• STX Kf Set Present Distance »
• Assign Communication Port (MCL Command) STX KJ »
• STX KI GPIO Input »
• STX Kn NIC Reset »
• STX KO GPIO Output »
• STX Kp Module Protection »
• STX KQ Query Memory Configuration »
• Query Memory Configuration (new format, Display-Equipped... »
• STX KR Reset Memory Configuration »
• STX Kr Resettable Counter Reset »
• STX KS Memory Configuration, Scalable Font Cache »
• STX KtE Write Electronic Article Surveillance (EAS) Bit »
• STX KtH Read and Feedback Tag Information to Host »
• STX KtR Read Data from RFID Tag »
• STX KtU Read Unique Serial Number from RFID Tag »
• STX KtW Write Data to RFID Tag »
• STX KuB Read Data from Ge Tag Section »
• STX KuF Send RFID Device Firmware Version »
• STX KuJ Write Data to Gen 2 Tag Section »
• STX KuR Read Data from RFID Tag »
• STX KuW Write Data to RFID Tag »
• STX KV Verifier Enable/Disable »
• STX KW Memory Configuration, Printable Label Width »
• STX Kx Delete Configuration File »
• STX KZ Immediately Set Parameter »
• Label Formatting Command Functions »
• Set Cut By Amount »
• Set Format Attribute »
• Bar Code Magnification »
• Set Column Offset Amount »
• Set Dot Size Width and Height »
• Terminate Label Formatting Mode and Print Label »
• Recall Printer Configuration »
• Advanced Format Attributes »
• Set Present Speed »
• Place Data in Global Register »
• Enter Heat Setting »
• Justification »
• Select Mirror Mode »
• Set Metric Mode »
• Set Inch (Imperial) Mode »
• Set Print Speed »
• Set Backfeed Speed »
• Set Quantity of Labels to Print »
• Set Row Offset Amount »
• Recall Stored Label Format »
• Set Feed Speed »
• Store Label Format in Module »
• Set Field Data Line Terminator »
• Mark Previous Field as a String Replacement Field »
• Terminate Label Formatting Mode »
• Select Font Symbol Set »
• Zero (Ø) Conversion to »
• Make Last Field Entered Increment Numeric (Alphanumeric)... »
• Make Last Field Entered Decrement Numeric (Alphanumeric)... »
• Set Count By Amount »
• Special Label Formatting Command Functions »
• STX S Recall Global Data and Place in Field »
• STX T Print Time and Date »
• Font Loading Command Functions »
• *c###D Assign Font ID Number »
• )s###W Font Descriptor »
• *c###E Character Code »
• (s#W Character Download Data »
• Generating Label Formats »
• Format Record Commands »
• Generating Records »
• The Structure of a Record »
• Record Structure Types »
• Internal Bit-Mapped Fonts »
• Smooth Font, Font Modules, and Downloaded Bit-Mapped Fonts »
• Scalable Fonts »
• Bar Codes »
• Images »
• Graphics »
• Lines and Boxes »
• Polygons »
• Circles »
• Fill Patterns »
• ASCII Control Chart »
• Sample Programs »
• VB Application to Send RAW Data via a Windows Printer... »
• Available Fonts – Sizes, References, and Samples »
• Reset Codes »
• Single Byte Symbol Sets »
• Bar Code Summary Data »
• Bar Code Default Widths and Heights »
• Bar Code Details »
• Single and Double Byte Character Font Mapping »
• Symbol Sets and Character Maps »
• Symbol Set Selection »
• Double-Byte Symbols, Chinese, Kanji, and Korean »
• General Purpose Input Output (GPIO) Port Applications »
• Class GPIO »
• Applicator Interface Card (Version 1) »
• Applicator Interface Card (Version 2) »
• Speed Ranges »
• Commands by Function »
• Class Series DPL Constraint Cross-Reference »
• Image Loading »
• UPC-A and EAN-13: Variable Price/Weight Bar Codes »
• International Language Print Capability (ILPC) Programming... »
• Plug and Play IDs »
• Line Mode »
• RFID Overview »
• WiFi Region Country Codes »
• Bar Code Symbology Information Resources »
• Glossary »
View All