Datamax I-4306 printer
Product Support Information
http://www.datamaxcorp.com/
Table of contents
View All 
• Overview
• Who Should Use This Manual
• General Conventions
• Computer Entry and Display Conventions
• Typical Data Flow Sequence
• Control Code Command Functions
• Introduction
• Attention-Getters
• Immediate Command Functions
• Introduction
• SOH # Reset
• SOH * Reset
• SOH A Send ASCII Status String
• SOH a Send ASCII Extended Status String
• SOH B Toggle Pause
• SOH C Stop/Cancel
• SOH D SOH Shutdown
• SOH E Send Batch Remaining Quantity
• SOH e Send Batch Printed Quantity
• SOH F Send Status Byte
• System-Level Command Functions
• Introduction
• STX A Set Time and Date
• STX a Enable Feedback Characters
• STX B Get Printer Time and Date Information
• STX c Set Continuous Paper Length
• STX d Set Double Buffer Mode
• STX E Set Quantity For Stored Label
• STX e Select Edge Sensor
• STX F Form Feed
• STX f Set Form Stop Position (Backfeed Command)
• STX G Print Last Label Format
• <STX>G
• STX I Input Image Data
• STX i Scalable Font Downloading
• STX J Set Pause for Each Label
• STX K Extended System-Level Commands
• STX k Test RS-232 Port
• STX L Enter Label Formatting Command Mode
• STX M Set Maximum Label Length
• STX m Set Printer to Metric Mode
• STX n Set Printer to Imperial Mode
• STX O Set Start of Print (SOP) Position
• STX o Cycle Cutter
• STX P Set Hex Dump Mode
• STX p Controlled Pause
• STX Q Clear All Modules
• STX q Clear Module
• STX R Ribbon Saver Control
• STX r Select Reflective Sensor
• STX S Set Feed Speed
• STX s Set Single Buffer Mode
• STX T Print Quality Label
• STX t Test DRAM Memory Module
• STX U Label Format String Replacement Field
• STX V Software Switch Settings
• <STX>v
• STX W Request Memory Module Information
• STX w Test Flash Memory Module
• STX X Set Default Module
• STX x Delete File from Module
• STX Y Output Sensor Values
• STX y Select Font Symbol Set
• STX Z Print Configuration Label
• STX z Pack Module
• Extended System-Level Command Functions
• Introduction
• STX K Memory Configuration
• Read Data from RFID Tag
• STX KaW Write Data to RFID Tag
• STX Kb Backfeed Time Delay
• STX KC Get Configuration
• STX Kc Configuration Set
• STX Kd Set File as Factory Default
• STX KE Character Encoding
• STX KF Select Factory Defaults
• STX Kf Set Present Distance
• STX KI GPIO Input
• STX Kn NIC Reset
• STX KO GPIO Output
• STX Kp Module Protection
• STX KQ Query Memory Configuration
• STX Kq Query Memory Configuration
• STX KR Reset Memory Configuration
• STX Kr Resettable Counter Reset
• STX KS Memory Configuration, Scalable Font Cache
• STX KtA Write Application Family Identifier (AFI) to Tag
• Write Data Storage Format Identifier (DSFID) to Tag
• STX KtE Write Electronic Article Surveillance (EAS) Bit
• STX KtH Read and Feedback Tag Information to Host
• STX KtR Read Data from RFID Tag
• STX KtU Read Unique Serial Number from RFID Tag
• STX KtW Write Data to RFID Tag
• STX KuB Read Data from Ge Tag Section
• STX KuF Send RFID Device Firmware Version
• STX KuJ Write Data to Gen 2 Tag Section
• STX KuR Read Data from RFID Tag
• STX KuW Write Data to RFID Tag
• STX KV Verifier Enable/Disable
• STX KW Memory Configuration, Printable Label Width
• STX Kx Delete Configuration File
• STX KZ Immediately Set Parameter
• Label Formatting Command Functions
• Introduction
• Set Cut By Amount
• Set Format Attribute
• Bar Code Magnification
• Set Column Offset Amount
• Set Cut By Amount
• Set Dot Size Width and Height
• Terminate Label Formatting Mode and Print Label
• Recall Printer Configuration
• Advanced Format Attributes
• Set Present Speed
• Place Data in Global Register
• Enter Heat Setting
• Justification
• Select Mirror Mode
• Set Metric Mode
• Set Inch (Imperial) Mode
• Set Print Speed
• Set Backfeed Speed
• Set Quantity of Labels to Print
• Set Row Offset Amount
• Recall Stored Label Format
• Set Feed Speed
• Store Label Format in Module
• Set Field Data Line Terminator
• Mark Previous Field as a String Replacement Field
• Terminate Label Formatting Mode
• Select Font Symbol Set
• Zero (Ø) Conversion to
• (>)(() Make Last Field Entered Increment
• (<)()) Make Last Field Entered Decrement
• Set Count By Amount
• Special Label Formatting Command Functions
• STX S Recall Global Data and Place in Field
• STX T Print Time and Date
• Font Loading Command Functions
• Introduction
• *c###D Assign Font ID Number
• )s###W Font Descriptor
• *c###E Character Code
• (s#W Character Download Data
• Generating Label Formats
• Introduction
• Format Record Commands
• Generating Records
• The Structure of a Record
• Record Structure Types
• Advanced Format Attributes
• ASCII Control Chart
• Sample Programs
• VB Application to Send RAW Data via a Windows Printer...
• Available Fonts – Sizes, References, and Samples
• Reset Codes
• Single Byte Symbol Sets
• Bar Code Summary Data
• Bar Code Default Widths and Heights
• Bar Code Details
• Single and Double Byte Character Font Mapping
• Symbol Sets and Character Maps
• Symbol Set Selection
• Double-Byte Symbols, Chinese, Kanji, and Korean
• General Purpose Input Output (GPIO) Port Applications
• Applicator Interface Card (Version 1)
• Applicator Interface Card (Version 2)
• Speed Ranges
• Commands by Function
• Image Loading
• UPC-A and EAN-13: Variable Price/Weight Bar Codes
• International Language Print Capability (ILPC) Programming...
• Plug and Play IDs
• Line Mode
• RFID Overview
• WiFi Region Country Codes
• Bar Code Symbology Information Resources
• Glossary
View All
http://www.datamaxcorp.com/
Table of contents
View All
• Overview
• Who Should Use This Manual
• General Conventions
• Computer Entry and Display Conventions
• Typical Data Flow Sequence
• Control Code Command Functions
• Introduction
• Attention-Getters
• Immediate Command Functions
• Introduction
• SOH # Reset
• (Display-Equipped Models only)
• SOH A Send ASCII Status String
• SOH a Send ASCII Extended Status String
• SOH B Toggle Pause
• SOH C Stop/Cancel
• (Non-Display Models only)
• SOH E Send Batch Remaining Quantity
• SOH e Send Batch Printed Quantity
• SOH F Send Status Byte
• System-Level Command Functions
• Introduction
• STX A Set Time and Date
• STX a Enable Feedback Characters
• STX B Get Printer Time and Date Information
• STX c Set Continuous Paper Length
• STX E Set Quantity For Stored Label
• STX e Select Edge Sensor
• STX F Form Feed
• STX f Set Form Stop Position (Backfeed Command)
• STX G Print Last Label Format
• <STX>G
• STX I Input Image Data
• <STX>J
• STX K Extended System-Level Commands
• STX k Test RS-232 Port
• STX L Enter Label Formatting Command Mode
• STX M Set Maximum Label Length
• STX m Set Printer to Metric Mode
• STX n Set Printer to Imperial Mode
• STX O Set Start of Print (SOP) Position
• STX o Cycle Cutter
• STX P Set Hex Dump Mode
• STX p Controlled Pause
• STX Q Clear All Modules
• STX q Clear Module
• STX R Ribbon Saver On/Off
• STX r Select Reflective Sensor
• STX S Set Feed Speed
• STX T Print Quality Label
• STX t Test DRAM Memory Module
• STX U Label Format String Replacement Field
• STX V Software Switch Settings
• <STX>v
• STX W Request Memory Module Information
• STX w Test Flash Memory Module
• STX X Set Default Module
• STX x Delete File from Module
• STX Y Output Sensor Values
• STX y Select Font Symbol Set
• STX Z Print Configuration Label
• STX z Pack Module
• Extended System-Level Command Functions
• Introduction
• Memory Configuration (Non-Display Models only) STX
• Empty Sensor Calibration (Non-Display Models only) STX K}E
• Manual Media Calibration (Non-Display Models only) STX K}M
• Quick Media Calibration (Non-Display Models only) STX K}Q
• STX KaR Read Data from RFID Tag
• STX Kb Backfeed Time Delay
• STX KC Get Configuration
• STX Kc Configuration Set
• Database Configuration (Non-Display Models only) STX KD
• STX Kd Set File as Factory Default
• STX KE Character Encoding
• Select Factory Defaults (Display-Equipped and EX2 Models...
• STX Kf Set Present Distance
• Assign Communication Port (MCL Command) STX KJ
• STX KI GPIO Input
• STX Kn NIC Reset
• STX KO GPIO Output
• STX Kp Module Protection
• STX KQ Query Memory Configuration
• Query Memory Configuration (new format, Display-Equipped...
• STX KR Reset Memory Configuration
• STX Kr Resettable Counter Reset
• STX KS Memory Configuration, Scalable Font Cache
• STX KtE Write Electronic Article Surveillance (EAS) Bit
• STX KtH Read and Feedback Tag Information to Host
• STX KtR Read Data from RFID Tag
• STX KtU Read Unique Serial Number from RFID Tag
• STX KtW Write Data to RFID Tag
• STX KuB Read Data from Ge Tag Section
• STX KuF Send RFID Device Firmware Version
• STX KuJ Write Data to Gen 2 Tag Section
• STX KuR Read Data from RFID Tag
• STX KuW Write Data to RFID Tag
• STX KV Verifier Enable/Disable
• STX KW Memory Configuration, Printable Label Width
• STX Kx Delete Configuration File
• STX KZ Immediately Set Parameter
• Label Formatting Command Functions
• Introduction
• Set Cut By Amount
• Set Format Attribute
• Bar Code Magnification
• Set Column Offset Amount
• Set Cut By Amount
• Set Dot Size Width and Height
• Terminate Label Formatting Mode and Print Label
• Recall Printer Configuration
• Advanced Format Attributes
• Set Present Speed
• Place Data in Global Register
• Enter Heat Setting
• Justification
• Select Mirror Mode
• Set Metric Mode
• Set Inch (Imperial) Mode
• Set Print Speed
• Set Backfeed Speed
• Set Quantity of Labels to Print
• Set Row Offset Amount
• Recall Stored Label Format
• Set Feed Speed
• Store Label Format in Module
• Set Field Data Line Terminator
• Mark Previous Field as a String Replacement Field
• Terminate Label Formatting Mode
• Select Font Symbol Set
• Zero (Ø) Conversion to
• Make Last Field Entered Increment Numeric (Alphanumeric)...
• Make Last Field Entered Decrement Numeric (Alphanumeric)...
• Set Count By Amount
• Special Label Formatting Command Functions
• STX S Recall Global Data and Place in Field
• STX T Print Time and Date
• Font Loading Command Functions