http://bizsupport2.austin.hp.com/...417.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All 
• Welcome
• Accessories
• Medi
• Print quality
• Configuration settings
• Software applications and drivers
• Fast track
• Setup checklist
• Task 1: Check that you have all the items required
• Task 2: (Optional) Install a memory expansion module
• Task 3: Position the printer
• Task 4: Switch on
• Task 5: Load the print cartridge(s)
• Task 6: (Optional) Change the language
• Task 7: Connect the printer to your computer
• Task 8: (Optional) Configure the printer
• Task 9: Set up the printer in your application software
• Task 10: Send a sample or demonstration print
• Caring for your media
• Choosing media
• Supported media types and relative costs
• Physical characteristics of media types
• Recommended print-quality settings and recommended media...
• Typical media-type choices by application
• Before loading media
• Before sending your file
• Loading sheet media
• To load a sheet (without the roll-feed option installed)
• To realign the sheet manually (if necessary)
• Loading roll media
• To change the roll
• To feed roll media into the printer
• To load a sheet with the roll-feed option installed
• Drying time
• To unload a sheet at the end of a print
• Ways to control the print’s appearance
• Page size
• Page size and clipped prints
• Rotating a print
• Can you rotate any drawing using the Setup Sheet
• To rotate a print using the printer’s Setup Sheet
• Exactly what is rotated
• The Rotate feature and clipped prints
• How does Rotate interact with your software
• Printing a mirror image
• Printing color drawings in monochrome
• To switch from color to monochrome
• Important points about monochrome printing
• Choosing an appropriate print quality
• To change the print quality on the front panel
• Print quality recommendations
• To cancel a print
• To copy a print
• To advance the media
• Their purpose and how to print them
• Using the Print Quality Test Print
• To see the current configuration of the printer
• To change the serial interface settings
• To upgrade your printer with more memory
• File size and memory usage
• To upgrade your printer with a network interface
• To upgrade the HP DesignJet 430 printer with color
• Recalibrating the printer for accuracy
• When to recalibrate the printer
• To recalibrate the printer
• Replacing cartridges
• When to replace cartridges
• Using genuine HP supplies
• Before replacing cartridges
• Front-panel lights Front-panel keys
• Using the documentation
• Locating the source of your problem
• Solving media-handling problems
• If the printer will not accept your media
• If the printer continually rejects your media, with the
• Clearing a media jam
• Solving communication problems
• Solving problems with print position or content
• If the print is completely blank
• If the output contains only a partial print
• If the print is clipped
• If the entire print is in one quadrant of the correct...
• If one print overlays another print on the same sheet
• If the output is distorted or unintelligible
• If the printer has drawn a different print from the one you...
• If pen settings seem to have no effect
• Solving print quality problems
• If there are white streaks in solid areas or gaps in lines...
• If there are jagged vertical or horizontal lines
• If there are slightly warped lines
• If there are color shadows
• If a cartridge is not printing at all
• If there are blotchy areas (uneven fill density)
• If there is other pronounced banding in area fills
• If ink smears after you remove a print
• Solving miscellaneous problems
• If the printer does not print
• If the printer seems too slow
• Getting help
• What to do before you call
• If a repair is needed
• Printer specifications
• Interface specifications
• Parallel (Centronics) cable
• Serial (RS-232-C) cables
• Interface cables
• Regulatory notices
• Ordering accessories
View All
http://bizsupport2.austin.hp.com/...529.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Welcome
• Fast track
• Setup checklist
• Task 1: Check that you have all the items required
• Task 2: (Optional) Install a memory expansion module
• Task 3: Position the printer
• Task 4: Switch on
• Task 5: Load the print cartridge(s)
• Task 6: (Optional) Change the language
• Task 7: Connect the printer to your computer
• Task 8: (Optional) Configure the printer
• Task 9: Set up the printer in your application software
• Task 10: Send a sample or demonstration print
• Caring for your media
• Choosing media
• Supported media types and relative costs
• Physical characteristics of media types
• Recommended print-quality settings and recommended media...
• Typical media-type choices by application
• Before loading media
• Before sending your file
• Loading sheet media
• To load a sheet (without the roll-feed option installed)
• To realign the sheet manually (if necessary)
• Loading roll media
• To change the roll
• To feed roll media into the printer
• To load a sheet with the roll-feed option installed
• Unloading media
• Drying time
• To unload a sheet at the end of a print
• Ways to control the print’s appearance
• Page size
• Page size and clipped prints
• Rotating a print
• Can you rotate any drawing using the Setup Sheet
• To rotate a print using the printer’s Setup Sheet
• Exactly what is rotated
• The Rotate feature and clipped prints
• How does Rotate interact with your software
• Printing a mirror image
• Printing color drawings in monochrome
• To switch from color to monochrome
• Important points about monochrome printing
• Choosing an appropriate print quality
• To change the print quality on the front panel
• Print quality recommendations
• To cancel a print
• To copy a print
• To advance the media
• Their purpose and how to print them
• Using the Print Quality Test Print
• Printing the Print Quality Test Print
• To see the current configuration of the printer
• To change the serial interface settings
• To upgrade your printer with more memory
• File size and memory usage
• To upgrade your printer with a network interface
• To upgrade the HP DesignJet 430 printer with color
• Replacing cartridges
• When to replace cartridges
• Using genuine HP supplies
• Before replacing cartridges
• Front-panel lights Front-panel keys
• Using the documentation
• Locating the source of your problem
• Solving media-handling problems
• If the printer will not accept your media
• If the printer continually rejects your media, with the
• Clearing a media jam
• Solving communication problems
• Solving problems with print position or content
• If the print is completely blank
• If the output contains only a partial print
• If the print is clipped
• If the entire print is in one quadrant of the correct...
• If one print overlays another print on the same sheet
• If the output is distorted or unintelligible
• If the printer has drawn a different print from the one you...
• If pen settings seem to have no effect
• Solving print quality problems
• If there are white streaks in solid areas or gaps in lines...
• If there are jagged vertical or horizontal lines
• If there are slightly warped lines
• If there are color shadows
• If a cartridge is not printing at all
• If there are blotchy areas (uneven fill density)
• If there is other pronounced banding in area fills
• If ink smears after you remove a print
• Solving miscellaneous problems
• If the printer does not print
• If the printer seems too slow
• Getting help
• What to do before you call
• If a repair is needed
• Printer specifications
• Interface specifications
• Parallel (Centronics) cable
• Serial (RS-232-C) cables
• Interface cables
• Regulatory notices
• Ordering accessories
View All