http://www.lexmark.com/.../setupbk.c77x.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All 
• Stability Information
• Getting started
• Conventions
• Using this book
• Turning off the printer
• Selecting a location for your printer and MFP
• Customizing your MFP option
• Drivers and options
• Where to begin
• Caster base setup
• Installing the caster base
• Installing the scanner shelf
• Installing the scanner
• Scanner cabinet setup
• Positioning the scanner cabinet
• Installing output options
• Scanner option setup
• Positioning the scanner
• Setting up the printer
• Removing the print cartridge packaging
• Loading paper
• Installing printer memory or option cards
• Accessing the printer system board
• Installing a memory card
• Installing a firmware card
• Installing the interface card
• Replacing the shield
• Scanner setup
• Installing the printer operator panel cover
• Unlocking the scanner
• Attaching cables and power cords
• Installing drivers
• Fax setup
• Performing manual fax setup
• Assigning a printer IP address
• Verifying the IP settings
• Performing browser fax setup
• Verify MFP setup
• Printing a menu settings page
• Printing the Help pages
• Making a test copy
• Sending a test fax
• Testing a scan to PC profile
• Distributing MFP user information
• Finding user instructions
• Distributing user information
• Limiting MFP use
• Solve setup problems
• Getting more help
View All
http://www.lexmark.com/pdfs/c77x/.../help.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Connection Guide
• Installing printer and software for local printing using...
• Installing printer and software for network printing using...
• Color quality guide
• Solving color quality problems
• Information guide
• Help menu pages
• Setup sheet
• Publications CD
• Other languages
• Moving guide
• Moving the printer and options to another location
• Menu map
• Printer operator panel
• Media guide
• Storing media
• Avoiding jams hints
• Printing guide
• Loading paper
• Loading other input options
• Set Paper Type and Paper Size
• Printing on specialty media (transparencies, labels, and so...
• Supplies guide
• Print cartridges
• Toner waste container
• Fuser or ITU
• Print quality guide
• Repetitive defects guide
View All
http://www.lexmark.com/pdfs/.../SGL2R2f2.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Title Page
• NOTICES
• EQUIPMENT REQUIREMENTS AND
• Customer Support
• AS/400 and iSeries Twinax Printing Using the Adapter for...
• PSF/MVS LAN Printing Using the Standard Network Port or...
• MVS Coax Printing Using the Adapter for SCS
• PSF/2 LAN Printing Using an Internal LAN Print Server
• PSF/AIX LAN Printing Using an Internal LAN Print Server
• Printer and Host Timeout Values
• Port Support for IPDS Printing
• Coax/Twinax Adapter for SCS Support
• Printer Messages and Problems
View All
http://www.lexmark.com/pdfs/c77x/.../mnm.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Using printer menus
• Understanding the printer operator panel
• Menu Groups
• Supplies Menu
• Paper Menu
• Default Source
• Paper Size/Type
• Configure MP
• Substitute Size
• Paper Texture
• Paper Weight
• Paper Loading
• Custom Types
• Universal Setup
• Bin Setup
• Reports
• Menu Settings Page
• Device Statistics
• Network Setup Page
• Wireless Setup Page
• Profiles List
• NetWare Setup Page
• Print Fonts
• Print Directory
• Print Demo
• Settings
• Setup Menu
• Finishing Menu
• Quality Menu
• Utilities Menu
• PDF Menu
• PostScript Menu
• PCL Emul Menu
• PPDS Menu
• HTML Menu
• Image Menu
• Security
• Network/Ports
• TCP/IP
• Wireless
• Standard Network and Network <x>
• Standard USB and USB <x>
• Parallel <x>
• Serial <x>
• NetWare
• AppleTalk
• LexLink
• USB Direct
• Help
• Understanding printer messages
View All
http://www.lexmark.com/pdfs/.../UGL2R4f3.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Title Page
• Trademarks and Credits
• Introduction
• About This Guide
• Equipment Requirements and Specifications for IPDS...
• Customer Support
• Conventions Used in the Manual
• Using the Operator Panel or Touch Screen for IPDS MENU...
• IPDS MENU Setup Options vs. Printer Setup Options
• Changing IPDS Settings Using the Operator Panel
• Accessing the IPDS MENU
• Example: Selecting a New Value as a Setting
• Example: Changing a Numerical Setting
• Saved Option Changes Become Active on New Session
• Printing the Menu Settings Page (printers)
• Changing IPDS Settings Using the MFP Touch Screen
• Printing the Menu Settings Page (MFPs)
• Setup Operations Reference
• IPDS MENU - Map of All Options
• Overview of EMULATION Menu Options and Values
• EMULATION – Options Descriptions
• IPDS Emulation
• Host Resolution
• Color Processing
• Text Processing
• Toner Saver
• BAR CODE
• DEFAULT CODEPAGE
• Codepage Version
• DEFAULT FGID
• Default CPI
• Page Counter
• Printable Area
• Exception Control
• Font Control
• Font Type
• IPDS Print Res
• Intervention Required
• IPDS Timeout
• Print IPDS Fonts
• Trace Functions
• IPDS Version
• Overview of PAPER HANDLING Menu Options and Values
• PAPER HANDLING Menu – Option Descriptions
• IPDS Blank Pages
• Offset Stacking
• UNIVERSAL SIZE
• OTHER ENV SIZE
• MAP INPUT TRAYS Menu Options
• MAP OUTPUT BINS Menu Options
• Descriptions of Output Bin Values
• Descriptions of IPDS Bin Selection Numbers
• Default Bin Mapping
• MARGINS Menu Options
• ALL INPUT TRAYS Menu
• TRAY 1 ADJUST Menu
• TRAY 2 ADJUST Menu
• TRAY 3 ADJUST Menu
• TRAY 4 ADJUST Menu
• TRAY 5 ADJUST Menu
• MP FEEDER ADJUST Menu
• ENV FEEDER ADJ Menu
• MANUAL PAPER ADJ Menu
• MANUAL ENV ADJ Menu
• Overview of the FONT CAPTURE Menu Options
• FONT CAPTURE Menu Options
• Capture Fonts
• Remove Fonts
• Duplex Printing Using Preprinted Media
• Finishing Support
• AS/400 and iSeries Offset Stacking
• Mainframe Offset Stacking
• Stapling
• AS/400 and iSeries Stapling
• Mainframe Stapling
• Hole Punching
• Hole Punching From an Input Source
• Hole Punching to an Output Bin
• IPDS Job Cancel
• Canceling IPDS Jobs
• How to Cancel a Job Using the Printer Operator Panel
• How to Cancel a Job Using the MFP Touch Screen
• Working with Captured Fonts
• Capture Font and Remove Font
• Preparing Fonts for Capture
• Capturing Fonts from an AS/400 or iSeries
• Capturing Fonts from a Mainframe Host
• Remote Configuration of Printer IPDS Settings
• Why Use a Browser
• Remote Configuration Using a Browser
• Functions that Can Not be Operated Remotely
• Printer Messages and Problems
• Command Reference
• XOA Print Quality Control
• XOH OPC Product Identifier Self Defining Field
• Finishing Operations Self-Defining Field
• up Printing
• Color and Simulated Grey Scale Printing
• TrueType Fonts
• Object Container Support
• IO Images as Resources
• Media Reporting by Object ID (OID)
• Warranty
• Technical Specifications
• Product Description
• IPDS Features List
• For Direct Network Attachment
• For Direct Twinaxial Attachment
• For Direct Coaxial Attachment
• Font and Code Page Information
• International Language Definitions
• Latin
• Latin 2/ROECE, Latin 3, Latin 4, Latin
• Cyrillic and Greek
• Arabic and Hebrew
• Japanese (non-Latin)
• About the Three Types of Supported Font Sets
• CompatibilityFont Sets
• 4028 Compatibility Font Set - 300 dpi bitmap fonts...
• 3812/3816 Compatibility Font Set - 240 dpi bitmap fonts
• IBM Core Interchange Scalable Font Set
• IBM Core Interchange Font Set Code Page Support
• Latin 1 Country Extended Code Pages
• Latin 1 EBCDIC Publishing Code Pages
• Latin 1 ASCII Code Pages
• Latin 2, 3, 4, 5, and 9 Code Pages
• Latin EBCDIC DCF Code Pages
• Cyrillic and Greek Code Pages
• Arabic Code Pages
• Hebrew Code Pages
• Symbol Code Pages
• IBM Coordinated Font Set
• OCR Scalable Font Set
• POSTNET Font Support
• Font Substitution
• Resident Emulation Font Substitution
• 3812/3816 Emulation Font substitution
• Bar Code Support: Linear (1-D) Bar Codes
• Bar Code Support: 2-D Bar Codes
• Data Matrix Special Function Parameter Support
• MaxiCode Special Function Parameter Support
• PDF417 Special Function Parameter Support
• QR Code (Quick Response Code)
• Printing DBCS Characters
• Memory Requirements and Recommendations
• Related Publications
• Glossary
View All
http://www.lexmark.com/pdfs/c77x/.../ug.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Installing and removing options
• Installing a 2000-sheet drawer
• Installing a 500-sheet drawer
• Installing a duplex unit
• Installing the printer
• Installing an output expander
• Installing a 5-bin mailbox
• Installing a StapleSmart finisher
• Installing memory and option cards
• Removing the system board access cover
• Installing a memory card
• Installing a firmware card
• Installing a hard disk
• Installing an option card
• Removing memory and option cards
• Accessing the printer system board
• Removing memory cards
• Removing an option card
• Removing a hard disk
• Removing a firmware card
• Reinstalling the system board access cover
• Printing
• Understanding the printer operator panel
• Operator panel buttons
• Sending a job to print
• Printing from a USB flash memory device
• Canceling a print job
• Canceling a job from the printer operator panel
• If the job you want to cancel is printing, and Busy appears...
• Canceling a job from a computer running Windows
• Canceling a job from a Macintosh computer
• Printing a menu settings page
• Printing a network setup page
• Printing a font sample list
• Printing a directory list
• Loading the trays
• Loading 500-sheet trays
• Loading the 2000-sheet tray
• Loading the multipurpose feeder
• Printing on specialty media (transparencies, labels, other)
• Windows
• Mac OS
• Linking trays
• Linking output bins
• Holding a job in the printer
• Printing and deleting held jobs
• Printing confidential jobs
• Tips for successful printing
• Storing paper
• Storing supplies
• Avoiding jams
• Media specifications
• Media guidelines
• Paper
• Transparencies
• Envelopes
• Labels
• Card stock
• Storing media
• Identifying media sources and specifications
• Maintaining the printer
• Determining the status of supplies
• Conserving supplies
• Ordering supplies
• Print cartridges
• Toner waste container
• Fuser and ITU
• Ordering a fuser
• Ordering an image transfer unit and transfer roller
• Ordering staple cartridges
• Recycling Lexmark products
• Clearing paper jams
• Identifying jams
• Access doors and trays
• Understanding jam messages
• Paper jam messages
• Clearing the entire paper path
• Area
• Area T1
• Area T<x>
• Clearing mailbox, finisher, or output expander jams (Area...
• Clearing fuser jams
• Clearing image transfer unit jams
• If you still need help
• Administrative support
• Adjusting operator panel brightness and contrast
• Disabling operator panel menus
• Enabling operator panel menus
• Restoring factory default settings
• Adjusting Power Saver
• Encrypting the disk
• Setting security using the Embedded Web Server (EWS)
• Setting the system password
• Using the secure Embedded Web Server
• Supporting SNMP (Simple Network Management Protocol...
• Supporting IPSec (Internet Protocol Security)
• Using Secure mode
• Using 802.1x Authenticating
• Locking the operator panel menus
• Printing Lockout
• Confidential Print Setup
• Black only mode
• Aligning the image transfer unit
• Using the Coverage Estimator
• Size sensing
• Disabling size sensing
• Configuring printer alerts
• Using the Setup Menu
• Using MarkVision Professional
• Using MarkVision Messenger
• Troubleshooting
• Online customer support
• Calling for service
• Checking an unresponsive printer
• Printing multi-language PDFs
• Solving printing problems
• Solving mailbox problems
• Solving option problems
• Solving high capacity feeder problems
• Solving paper feed problems
• Solving print quality problems
• Solving color quality problems
• Frequently asked questions (FAQ) about color printing
• What are Detailed Color Samples and how do I access them
• Notices
View All
http://www.lexmark.com/pdfs/.../ug.c77x.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Learning about the MFP
• Basic functions of the scanner
• Automatic document feeder and flatbed
• Understanding the MFP control panel
• Home screen and Home screen buttons
• Using the LCD touch-screen buttons
• Sample screen one
• Information on touch-screen buttons
• Sample screen two
• Other touch-screen buttons
• Features
• Menus
• Copying
• Quick copy
• Multiple page copying
• Using the flatbed
• Understanding the copy screens and options
• Copying from one size to another
• Making transparencies
• Copying to letterhead
• Copying photographs
• Making copies using media from a selected tray
• Copying mixed-sized media
• Setting the duplex option
• Reducing and enlarging copies
• Adjusting copy quality
• Setting collation options
• Placing separator sheets between copies
• Setting paper saving options
• Placing the date and time at the top of each page
• Placing an overlay message on each page
• Creating a custom job (job build)
• Canceling a copy job
• While the document is in the ADF
• While copying pages using the flatbed
• While the pages are being printed
• Copy tips
• mail
• Entering an e-mail address
• Using a shortcut number
• Using the address book
• mailing to a profile
• Adding e-mail subject and message information
• Changing the output file type
• mailing color documents
• Creating an e-mail shortcut
• From a computer
• From the MFP
• Creating an e-mail profile
• Canceling an e-mail
• Understanding e-mail options
• mail server setup
• Address book setup
• Faxing
• Sending a fax
• Using fax destination shortcuts
• Sending faxes from a computer
• Creating shortcuts
• Understanding fax options
• Changing the fax resolution
• Adjusting the Darkness setting
• Sending a fax at a later time
• Cancel an outgoing fax
• Viewing a fax log
• Fax tips
• FTP
• Entering the FTP address
• FTP options
• FTP tips
• Scanning to a PC or USB flash memory device
• Create a scan to PC profile
• Understanding scan to PC options
• Scanning to a USB flash memory device
• Scanning tips
• Printing
• Printing from a USB flash memory device
• Canceling a print job
• Canceling a job from the MFP control panel
• Canceling a job from a computer running Windows
• Canceling a job from a Macintosh computer
• Printing the menu settings page
• Printing a network setup page
• Printing a font sample list
• Printing a directory list
• Printing confidential and held jobs
• Printing a confidential job
• Printing and deleting held jobs
• Printing on specialty media
• Loading standard trays and optional trays
• Loading 500-sheet trays
• Loading the 2000-sheet tray
• Loading the multipurpose feeder
• Linking trays
• Understanding paper and specialty media guidelines
• Supported print media
• Selecting print media
• Paper
• Transparencies
• Envelopes
• Labels
• Card stock
• Storing print media
• Avoiding jams
• Automatic document feeder
• Printer
• Installing and removing options
• Accessing the printer system board
• Installing a memory card
• Installing a firmware card
• Installing the interface card
• Replacing the shield
• Maintaining the MFP
• Storing supplies
• Determining the status of supplies
• Ordering supplies
• Ordering an ADF pick pad
• Ordering an ADF pick roller
• Recycling Lexmark products
• Cleaning the scanner glass and backing material
• Cleaning the automatic document feeder
• Scanner registration
• Removing the scanner top
• Moving the MFP
• Moving the MFP within the office
• Preparing the MFP for shipment
• Clearing jams
• Identifying jams
• Printer access doors and trays
• Understanding printer jam messages
• Clearing scanner jams
• Administrative support
• Adjusting control panel brightness
• Brightness
• Restoring factory default settings
• Adjusting screen timeout
• Adjusting Power Saver
• Configuring the MFP
• Setting Password Protect for the menus
• Restricting Function Access
• Preventing access to the menus from the control panel
• Disabling the Driver to Fax menu item
• Setting the Device Lockout personal identification number...
• Setting a password before printing received faxes
• Releasing held faxes for printing
• Setting security using the Embedded Web Server (EWS)
• Using the secure EWS
• Supporting SNMP (Simple Network Management Protocol...
• Supporting IPSec (Internet Protocol Security)
• Disabling ports and protocols
• Using 802.1x authentication
• Confidential Print Setup
• Encrypting the hard disk
• Hard disk wiping
• Using the Restricted Server List function
• Troubleshooting
• Understanding MFP messages
• Online technical support
• Checking an unresponsive MFP
• Locating the port name and IP address
• Solving copy quality problems
• Solving scan quality problems
• Solving fax problems
• Solving paper feed problems
• Notices
• Conventions
• Electronic emission notices
• Federal Communications Commission (FCC) compliance...
• Other telecommunications notices
• Notice to users of the Canadian telephone network
• Notice to users of the New Zealand telephone network
• South Africa telecommunications notice
• Using this product in Germany
• Using this product in Switzerland
• Noise emission levels
• Power regulation notice
• Waste from Electrical and Electronic Equipment (WEEE)...
View All
http://www.lexmark.com/...guide_c78x_en.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Learning about the MFP
• Basic functions of the scanner
• Automatic document feeder and flatbed
• Understanding the MFP control panel
• Home screen and Home screen buttons
• Using the LCD touch-screen buttons
• Sample screen one
• Information on touch-screen buttons
• Sample screen two
• Other touch-screen buttons
• Features
• Menus
• Copying
• Quick copy
• Multiple page copying
• Using the flatbed
• Understanding the copy screens and options
• Copying from one size to another
• Making transparencies
• Copying to letterhead
• Copying photographs
• Making copies using media from a selected tray
• Copying mixed-sized media
• Setting the duplex option
• Reducing and enlarging copies
• Adjusting copy quality
• Setting collation options
• Placing separator sheets between copies
• Setting paper saving options
• Placing the date and time at the top of each page
• Placing an overlay message on each page
• Creating a custom job (job build)
• Canceling a copy job
• While the document is in the ADF
• While copying pages using the flatbed
• While the pages are being printed
• Copy tips
• mail
• Entering an e-mail address
• Using a shortcut number
• Using the address book
• mailing to a profile
• Adding e-mail subject and message information
• Changing the output file type
• mailing color documents
• Creating an e-mail shortcut
• From a computer
• From the MFP
• Creating an e-mail profile
• Canceling an e-mail
• Understanding e-mail options
• mail server setup
• Address book setup
• Faxing
• Sending a fax
• Using fax destination shortcuts
• Sending faxes from a computer
• Creating shortcuts
• Understanding fax options
• Changing the fax resolution
• Adjusting the Darkness setting
• Sending a fax at a later time
• Cancel an outgoing fax
• Viewing a fax log
• Fax tips
• FTP
• Entering the FTP address
• FTP options
• FTP tips
• Scanning to a PC or USB flash memory device
• Create a scan to PC profile
• Understanding scan to PC options
• Scanning to a USB flash memory device
• Scanning tips
• Printing
• Printing from a USB flash memory device
• Canceling a print job
• Canceling a job from the MFP control panel
• Canceling a job from a computer running Windows
• Canceling a job from a Macintosh computer
• Printing the menu settings page
• Printing a network setup page
• Printing a font sample list
• Printing a directory list
• Printing confidential and held jobs
• Printing a confidential job
• Printing and deleting held jobs
• Printing on specialty media
• Loading standard trays and optional trays
• Loading 500-sheet trays
• Loading the 2000-sheet tray
• Loading the multipurpose feeder
• Linking trays
• Understanding paper and specialty media guidelines
• Supported print media
• Selecting print media
• Paper
• Transparencies
• Envelopes
• Labels
• Card stock
• Storing print media
• Avoiding jams
• Automatic document feeder
• Printer
• Installing and removing options
• Accessing the printer system board
• Installing a memory card
• Installing a firmware card
• Installing the interface card
• Replacing the access cover plate
• Maintaining the MFP
• Storing supplies
• Determining the status of supplies
• Ordering supplies
• Ordering an ADF pick pad
• Ordering an ADF pick roller
• Recycling Lexmark products
• Cleaning the scanner glass and backing material
• Cleaning the automatic document feeder
• Scanner registration
• Removing the scanner top
• Moving the MFP
• Moving the MFP within the office
• Preparing the MFP for shipment
• Clearing jams
• Identifying jams
• Printer access doors and trays
• Understanding printer jam messages
• Clearing scanner jams
• Administrative support
• Adjusting control panel brightness
• Brightness
• Restoring factory default settings
• Adjusting screen timeout
• Adjusting Power Saver
• Configuring the MFP
• Setting Password Protect for the menus
• Restricting Function Access
• Preventing access to the menus from the control panel
• Disabling the Driver to Fax menu item
• Setting the Device Lockout personal identification number...
• Setting a password before printing received faxes
• Releasing held faxes for printing
• Setting security using the Embedded Web Server (EWS)
• Using the secure EWS
• Supporting SNMP (Simple Network Management Protocol...
• Supporting IPSec (Internet Protocol Security)
• Disabling ports and protocols
• Using 802.1x authentication
• Confidential Print Setup
• Encrypting the hard disk
• Hard disk wiping
• Using the Restricted Server List function
• Troubleshooting
• Understanding MFP messages
• Online technical support
• Checking an unresponsive MFP
• Locating the port name and IP address
• Solving copy quality problems
• Solving scan quality problems
• Solving fax problems
• Solving paper feed problems
• Notices
• Conventions
• Electronic emission notices
• Federal Communications Commission (FCC) compliance...
• Other telecommunications notices
• Notice to users of the Canadian telephone network
• Notice to users of the New Zealand telephone network
• South Africa telecommunications notice
• Using this product in Germany
• Using this product in Switzerland
• Noise emission levels
• Power regulation notice
• Waste from Electrical and Electronic Equipment (WEEE)...
• China RoHS
View All
http://www.lexmark.com/pdfs/.../TNL2R3f2.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• Getting Started
• SCS/TNe in a LAN environment
• Documentation Overview
• Equipment Requirements and Specifications
• Support
• Important Configuration Basics
• Introduction
• What are IDB Options, IDB events etc
• Setup Options vs. Printer Setup Options
• Understanding the Control Panel
• Printer operator panel
• Accessing the SCS/TNe menu
• Selecting a New Value as a Setting
• Changing a Text String
• Changing a Numerical Setting
• MFP Touch Screen
• Remote Configuration Using a Browser
• How Remote Configuration Works
• How to Use the Browser Interface
• Installation Setup for Mainframe Users
• Task 1A - Configuring the Host
• Task 1B - Configuring the Host for Printing via a SNA...
• Task 2A - Configuring a Host For TN3270e Printing
• Task 2B - Configuring an SNA Server For TN3270e Printing
• Task 3 - Configuring a Print Server
• Task 4 - Configuring the SCS Settings
• Task 5 - Configuring the SCS/TNe Emulation
• Task 6A - Verifying the Mainframe Connection
• Task 6B - Verifying the Mainframe/SNA Server Connection
• Installation Setup for AS/400 and iSeries Users
• Task 1 - Configuring the Host
• Task 2 - Configuring a Print Server
• Task 3 - Configuring the SCS Settings
• Task 4 - Configuring the SCS/TNe Emulation
• Task 5 - Verifying the Host Connection
• SCS/TNe Cancel
• About Cancel Job
• Important!
• Printer Cancel Job
• MFP Cancel Job
• Operations Reference - Common Setup
• Menu Options Overview
• Disconnect Ses
• Reset TN Session
• SCS Debug Trace
• Reset ALL Def
• Operations Reference - TN3270E SETUP
• NETWORK SETUP Menu: Options Overview
• Print Active
• TN3270 Defaults
• Connect Status
• NETWORK SETUP> SERVER INFO Menu: Options Overview
• Name / IP Address
• IP Address
• Hostname
• TN Server Port
• LU Name
• Device Type
• Keep Alive Type
• Keep Alive Time
• SCS OPTIONS Menu: Options Overview
• COR/APO Sett (IDB Option 122)
• SCS Options > MISC SETTINGS Menu: Options Overview
• FF Support (IDB Option 5)
• Non-Print Char (IDB Option 3)
• CSC Characters (IDB Options 8 & 9)
• IDB Delimiter (IDB Option 7)
• Use IR (IDB Option 21)
• Format Ctrl Sup (IDB Option 177)
• Country Code (IDB Option 2)
• Skip Blank Page (IDB Option 32)
• CPI (IDB Option 100)
• Max Prt Pos (IDB Option 102)
• LPI (IDB Option 105)
• Line Spacing (IDB Option 106)
• LPP (IDB Option 107)
• Transparency (IDB Option 167)
• Form Strings (IDB Option 168)
• IBM Trn Code (IDB Option 169 bit 1)
• Leadin Sequence (IDB Option 169 bi )
• Euro Support (IDB Event 191)
• SCS Options> MISC SETTINGS > BOLD PRINT Menu - Options...
• Bold On CR (IDB Option 22 bit 1)
• Bold On BS (IDB Option 22 bit 2)
• Bold On Multi BS (IDB Opt. 22 bit 3)
• SCS Options > PAPER SETTINGS Menu: Options Overview
• Left Margin (IDB Option 103)
• Right Margin (IDB Option 104)
• Top Margin (IDB Option 108)
• Bottom Margin (IDB Option 109)
• Source Input (IDB Option 113)
• Tray 1 Orient (IDB Option 123)
• Tray 2 Orient (IDB Option 124)
• Tray 3 Orient (IDB Option 125)
• Tray 4 Orient (IDB Option 126)
• Tray 5 Orient (IDB Option 127)
• Tra Paper Size (IDB Option 90)
• Tra Paper Size (IDB Option 91)
• Tra Paper Size (IDB Option 92)
• Tra Paper Size (IDB Option 93)
• Tra Paper Size (IDB Option 94)
• TEST OPTIONS Menu: Options Overview
• SCS3270 Hex Dump
• Print 3270 IDB
• SCS3270 Defaults
• Operations Reference - TN5250E SETUP
• CONNECTION # Menu: Options Overview
• Print # Active
• TN5250## Default
• Connect # Status
• CONNECTION # > SERVER # INFO Menu: Options Overview
• Name / IPaddress
• IP # Address
• Server # TN Port
• Device # Name
• MSGQ # Name
• MSGQ # Lib
• IR # Reply
• Auto Sense # END
• Overlay Call (IDB Option 28)
• Prop Font Move (IDB Option 118)
• Compress CPI (IDB Option 128)
• Move Hor/Ver (IDB Option 158)
• Download Font (IDB Option 244)
• Euro Support (IDB Option 139)
• SCS OPTIONS > CSC CHARACTERS Menu: Options Overview
• IDB First Char (IDB Option 8)
• IDB Second Char (IDB Option 9)
• SCS OPTIONS > COR/APO SETTINGS Menu: Options Overview
• Def Page Ori 1 (IDB Option 121)
• Def Page Ori 2 (IDB Option 122)
• COR Action 1 (IDB Option 123)
• COR Action 2 (IDB Option 124)
• PPM Quality Dis (IDB Opt.126)
• COR LSI Reduc (IDB Option 127)
• Codepage (IDB Options 240 and 241)
• Font (IDB Options 242 and 243)
• Max Print Pos (IDB Option 102)
• Lines Per Page (IDB Option 107)
• Forms Media (IDB Option 114)
• Output Bin (IDB Option 115)
• Simplex/Duplex (IDB Option 116)
• Left Margin COR (IDB Opt. 78 & 79)
• Top Margin COR (IDB Opt. 80 & 81)
• Left Margin Lan (IDB Opt. 86 & 87)
• Top Margin Lan (IDB Opt. 88 & 89)
• Page Length (IDB Opt. 82 & 83)
• Page Width (IDB Opt.84 & 85)
• SCS5250 Hex Dump
• Print 5250 IDB
• SCS5250 Defaults
• IDB Basics
• The IDB Languages
• Other References
• IDB Languages Usage
• IDB Configuration File Management
• Retrieving the IDB Configuration File
• Editing the IDB Configuration File
• Storing the IDB Configuration File
• Additional TN5250e Printer Commands Using IDB
• Input Data String Syntax
• Initializing - Power On Initialize
• Paper Handling > Source Drawer
• Paper Handling > Destination Drawer
• Paper Handling > Select Paper / Envelope Media
• Paper Handling > Select Paper Feed
• Paper Handling > Select Simplex/Duplex Printing
• Code Page 259 > Before/After
• Miscellaneous > Overlay Command
• Miscellaneous > Before / After Formfeed
• Miscellaneous > Before Portrait/ Landscape Selection
• Miscellaneous > IDBdump/ Hexdump Subtitle
• Miscellaneous > Move to Uppermost Line
• Warranty
• Appendix A - Specifications, Requirements, Features
• Product Description
• Compatibility
• Print Platforms
• Features List: 3270 SCS
• Features List: 5250 SCS
• Appendix B - ASCII Character Table
• Printable Characters
• Appendix C - Special TN3270e IDB Commands
• How to Print an IDB Report
• List of Commands
• Appendix D - COR/APO Logic (TN5250e)
• Details
• Flowchart
• Appendix E - Special TN5250e IDB Commands
• Appendix F - Managing the SCS TN5250e Font Table
• The "Font" Programming Command
• Set Substituted Font ID
• Edition Notice
• Trademarks
View All
http://www.lexmark.com/...ref-2-20-2007.pdf
We hope you like our service. Recommend it to your friends.
Table of contents
View All
• CHAPTER 1: Introduction
• Overview
• Navigational Tips
• Printing the File
• Bibliography
• CHAPTER 2: PCL Emulation
• Selecting PCL Emulation
• Using SmartSwitch
• Using the Operator Panel or MarkVision Professional
• Using Your Software Program
• Page Formatting
• Printable Areas
• Print Area Menu Item
• Command Structure
• Control Codes
• Commands
• PCL Emulation Commands
• PCL Emulation Commands by Function
• GL/2 Commands
• Raster Image Graphics
• Raster Compression Mode
• Macros
• CHAPTER 3: Printer Job Language
• PJL Command Notation
• Kernel Commands
• Job Separation Commands
• Environment Commands and Variables
• Common Variables for PCL Emulation
• Status Readback Commands
• Status Message Format
• Information Messages
• Auto-Continuable Conditions
• Attendance Conditions
• Operator Intervention - Paper Handling
• Operator Intervention - Paper Jams
• Service Errors
• Device Attendance Commands
• Unique PJL Commands
• File Commands for Flash or Disk
• File and Device Protection Commands
• Protecting a File or Device
• Unlocking a Protected File or Device
• Re-Locking a Protected File or Device
• Unlocking a Protected File or Device for the Current Job
• Recovering Lost Passwords
• CHAPTER 4: PostScript Emulation
• Selecting PostScript Emulation
• Paper Tray Support
• Envelope Size Support
• Envelope Tray Support
• Supplemental Operator Summary
• Page Device Parameters
• Interpreter Parameters
• User parameters
• System Parameters
• Device Parameters
• Status and Error Messages
• Tagged Binary Not Active
• Tagged Binary Active
• Status Messages
• CHAPTER 5: Switching Languages
• SmartSwitch
• Setting SmartSwitch for Different Interfaces
• Printer Job Language
• Sniffing
• CHAPTER 6: Flash Memory and Disk
• Resource Data Collection (Download Target)
• Storing Resources on Flash Memory or Disk
• Viewing the Contents of Flash Memory and Disk
• Password Protection
• Rewriting the Flash Content
• Accessing Files with PostScript Emulation
• File Naming Conventions
• Device Search Order
• Performance
• Job Buffering
• Creating a Partition
• Enabling Job Buffering
• Disabling Job Buffering
• Recovering from a Power Loss
• CHAPTER 7: Printer Specifications
• Airflow Requirement
• Noise Emission Levels
• Electrical Specifications
• Power Requirements
• Physical Specifications
• Clearance Requirements
• Environmental Conditions
• Altitude Specifications
• Atmospheric Pressure
• CHAPTER 8: Printer Interfaces
• Setting Up the Communications Port
• Setting Up the Communications Port Using Windows 95/98/Me
• Setting Up the Communications Port Using Windows NT
• Setting Up the Communications Port Using Windows 2000
• Setting Up the Communications Port Using Windows XP
• Deciding Which Interface to Use
• Parallel Interface
• Standard Parallel Connector
• Using the INIT* Signal to Initialize
• Computer-to-Printer Communications
• Printer-to-Computer Communication (Advanced Status)
• Parallel Mode
• Signal Descriptions
• Using the RS-232C Serial Interface
• Network Support
• Input Buffer
• APPENDIX A: PCL Support
• APPENDIX B: PJL Support
• APPENDIX C: PostScript Support
View All
www.epinions.com
We can’t show a description for this result because the site does not allow it...
READ FULL ARTICLE »
