View All

• SECTION ONE: Introducing the Northstar radar
• SECTION TWO: Installing and wiring the radar
• System diagram
• Installing the radar antenna
• Choosing the antenna location
• Mounting the radar antenna
• Installing the control box
• Replacing the fuse
• Wiring the radar
• Radome cable connection
• Open array cable connection
• Connecting a ground wire
• Connecting the power cable
• Radar power control
• Connecting the radar control box to the navigator
• Wiring the heading sensor
• SECTION THREE: Setting up the radar
• Radar transmitter status
• Heading sensor requirements
• Calibrating the radar
• Preparing for calibration
• Setting the Trigger Delay
• Radar tuning
• Presets
• Setting the STC Curve
• Setting the Heading Calibration
• Antenna parking position
• SECTION FIVE: Using manual control functions
• Gain and clutter adjustments
• Rain Clutter
• Sea Clutter
• Gain
• Other functions
• SECTION SIX: Servicing the radar
• Contacting Northstar
• Hearing from you
• Returning a radar for service
• APPENDIX A: Specifications and Drawings
• APPENDIX B: Troubleshooting
• Confirming the equipment installed
• Make sure the power is present and correctly wired
• Are Range Rings displayed
• If the array or antenna fails to turn
View All
