Panasonic WJ-RT416 DVR
Product Support Information
http://service.us.panasonic.com/
Table of contents
View All 
• Limitation of liability
• Disclaimer of warranty
• Important safety instructions
• Precautions
• Preface
• Features
• About these operating instructions
• Trademarks and registered trademarks
• Major operating controls and their functions
• Front View
• Rear View
• Image display
• Startup
• Adjustment of the clock of the recorder
• Shutdown of the recorder
• Monitor live images from the cameras
• Display images on a single screen
• Display images from cameras on a multi-screen
• Display images from the cameras sequentially (sequential...
• Recording
• Manual recording
• Timer recording
• Alarm recording
• Playback
• Search and play
• Start playback by designating the desired time and date of...
• Search and play with multiple search filters
• Alarm function
• Action at an event occurrence (alarm action)
• Cancel the alarm action
• Copying (Duplicate)
• Log in as a different user
• Log out
• Log in
• Disk management
• Check HDD information
• Format the HDD
• Operate the recorder using a PC
• Functions and their descriptions
• System requirements for a PC
• Installation
• HDD safety mode
• Operating the recorder for the first time
• Installation
• HDD replacement
• HDD addition
• Rack mounting
• Connection
• Basic connection
• Connection with RS485 cameras
• Connection with PS Data systems
• Connection with a PC
• DIP Switch Setting
• RS485 (CAMERA) port
• AUDIO IN/ALARM OUT terminal
• ALARM IN/CONTROL terminal
• Setup menu
• Setup menu chart
• Basic operation of the setup menu
• Configure the system settings [System Setup]
• Configure the recording settings [Recording Setup]
• Configure the alarm action settings [Event Setup]
• Configure the display settings [Display Setup]
• Configure the settings relating to the camera control...
• Configure the settings relating to communications with...
• Configure the settings relating to user information [User...
• Maintenance functions [Maintenance]
• Operation using the system controller
• Troubleshooting
• Specifications
• Standard accessories
• Recording time length
View All
http://service.us.panasonic.com/
Table of contents
View All
• Limitation of Liability
• Disclaimer of Warranty
• Preface
• About These Operating Instructions
• System Requirements for a PC
• Trademarks and Registered Trademarks
• Abbreviations
• Installation
• Uninstallation of the monitoring software
• Start the RT4Client
• Operation window
• Image display area
• Area selection buttons
• Multi-screen selection buttons
• Status display area
• Error/alarm display area
• Recorder control buttons
• System control buttons
• Time and date display area
• Recorder information display area
• Configure the Network Settings
• Configure the network settings of the recorder
• Configure the network settings of a PC
• Settings relating to the connection with the recorder
• Monitor Live Images
• Switch the image display area between a single screen and a...
• Check the status of the camera
• Temporarily change color of text displayed in the image...
• Control the cameras
• Disconnect the connection with camera
• Login to the recorder
• Play recorded images on the recorder
• Stop playback
• Display the control panel
• Close the control panel
• Save the image currently being displayed on the PC
• The image currently displayed will be saved
• Capture the images currently being displayed
• Muting audio
• Display images from the camera on a full screen
• Control the cameras
• Brightness, auto function
• Operations during playback
• Other available operations when displaying live images
• Frame display
• Sequential display
• Favorite Display
• Map display
• Recorder operation
• Configuration of the settings of the recorder System Setup...
• Recording/Event Setup (Setup – Recording/Event Setup)
• Communication Setup (Setup – Communication Setup)
• Check of each log of the recorder (Log)
• Check of the system information and disk information of the...
• Start/stop of the manual recording using this software...
• Reboot of the recorder (Maintenance – Reboot)
• Firmware update of the recorder Firmware Update...
• Download recorded images from the recorder
• Remote Talk
• Recorder Setup (Monitor System Config – Recorder Setup)
• My Favorite Display Setup (Monitor System Config – My...
• Sequential Display Setup (Monitor System Config –...
• Map Setup (Monitoring System Config – Map Setup)
• Advanced Setup (Monitoring System Config – Advanced Setup)
• Monitor System Version
• Language
• Playback downloaded recorded images using the RT4Viewer
• Start the RT4Viewer
• Playback downloaded recorded images
• Search and play
• Alteration check
• Troubleshooting
View All
http://service.us.panasonic.com/
Table of contents
View All
• Limitation of liability
• Disclaimer of warranty
• Important safety instructions
• Precautions
• Preface
• Features
• About these operating instructions
• Trademarks and registered trademarks
• Major operating controls and their functions
• Front View
• Rear View
• Image display
• Startup
• Adjustment of the clock of the recorder
• Shutdown of the recorder
• Monitor live images from the cameras
• Display images on a single screen
• Display images from cameras on a multi-screen
• Display images from the cameras sequentially (sequential...
• Recording
• Manual recording
• Timer recording
• Alarm recording
• Playback
• Search and play
• Start playback by designating the desired time and date of...
• Search and play with multiple search filters
• Alarm function
• Action at an event occurrence (alarm action)
• Cancel the alarm action
• Copying (Duplicate)
• Log in as a different user
• Log out
• Log in
• Disk management
• Check HDD information
• Format the HDD
• Operate the recorder using a PC
• Functions and their descriptions
• System requirements for a PC
• Installation
• HDD safety mode
• Operating the recorder for the first time
• Installation
• HDD replacement
• HDD addition
• Rack mounting
• Connection
• Basic connection
• Connection with RS485 cameras
• Connection with PS Data systems
• Connection with a PC
• RS485 (CAMERA) port
• AUDIO IN/ALARM OUT terminal
• ALARM IN/CONTROL terminal
• Setup menu
• Setup menu chart
• Basic operation of the setup menu
• Configure the system settings [System Setup]
• Configure the recording settings [Recording Setup]
• Configure the alarm action settings [Event Setup]
• Configure the display settings [Display Setup]
• Configure the settings relating to the camera control...
• Configure the settings relating to communications with...
• Configure the settings relating to user information [User...
• Maintenance functions [Maintenance]
• Operation using the system controller
• Troubleshooting
• Specifications
• Standard accessories
• Recording time length
View All
http://service.us.panasonic.com/
Features: Before attempting to connect or operate this product, ... Warning: All work related to the installation of this ... The Data Multiplex Board, WV-PB4164, is an optional board ... Unplug the power cord from the WJ-RT416 before installing ...
