Product Support Information
http://www.printronix.com/
Table of contents
View All 
• 032 Laser Printer
• Important Safety Information
• Regulatory Information
• Chapter 1 Product Description
• Contents
• Overview
• User’s Manual Conventions
• Location of Printer Components
• Figure 1-1. Front of Printer
• Figure 1-2. Operator Panel
• Figure 1-3. Paper Input Side of Printer
• Figure 1-4. Paper Exit Side of Printer
• Figure 1-5. Back of Printer
• Figure 1-7. Consumables Inside Printer
• Consumables
• Environment
• Printer Cleaning and Maintenance
• Chapter 2 Printer Operation
• Operator Panel
• Printer Operation Menus
• Selecting Printer - Host I/O Interface
• Selecting the Ethernet Interface Manually
• Selecting the Parallel Interface
• Using the Cutter
• On-Demand (Manual) Cutter Operation
• Auto Cut Mode
• Retraction Mode
• Adjusting the Cutter
• Chapter 3 Paper Loading
• Contents
• Recommended Media
• Storing Paper
• Loading Paper
• Chapter 4 Replacing Consumables
• Contents
• Overview
• OPC module
• Replacement Intervals
• Ordering Consumables
• Storing Consumables
• Using the Maintenance & Service Log
• Adding Toner
• Open the Toner Kit Box
• Remove the Spent Toner Cartridge
• Install the New Toner Cartridge
• Replace the Waste Toner Bottle
• Replacing the OPC Module
• Open the OPC Module Kit Box
• Replacing the Transfer Charger Unit
• Replacing the Developer Unit
• Open the Box
• Fill the New Developer Unit with Developer Mix
• Initialize the Developer Unit
• Replacing the Fuser Unit and Exit Rollers
• Open the Fuser Kit Box
• Remove the Spent Fuser Unit and Exit Rollers
• Install the New Fuser Unit and Exit Rollers
• Chapter 5 Printer Cleaning
• Contents
• Overview
• Giving the Printer a Tune-Up
• Cleaning Supplies
• Weekly Cleaning Procedure
• Clean the Main Charger Unit
• Clean the Transfer Charger Unit
• Monthly Cleaning Procedure
• Prepare to Remove the Consumables
• Remove the OPC Module
• Remove the Developer Unit
• Remove the Transfer Charger Unit
• Remove the Fuser Unit
• Remove the Waste Toner Bottle
• Clean Inside the Printer
• Install the Fuser Unit
• Install the Developer Unit
• Finish the Procedure
• Chapter 6 Troubleshooting
• Overview
• Print Quality Problems
• Samples of Print Quality Problems
• No Image – No Toner on Paper (White Page)
• No Image – Toner Covers Paper (Black Page)
• Image Is Too Light
• Gray Image in White Areas
• Black Edge on One Side of Paper
• White Vertical Line
• Black Vertical Line
• Black Horizontal Line
• White Spots
• Black Spots
• Grainy Image
• Toner Does Not Stick to All Parts of Image
• Bottom Edges of Image Are Rough
• Paper Is Creased
• Distorted Image
• Part of Image Does Not Print
• Offset Image (Ghost of Image)
• Blurred Image
• Spattered Toner Near Top Edge of Paper
• Spattered Toner Near Bottom Edge of Paper
• Out-of-Position Image
• Clearing a Paper Jam
• First Occurrence of Paper Jam
• Reoccurrence of Paper Jam
• Status and Error Messages
• Status Messages
• Output Device Full Messages
• Warning Messages (Informational – does not stop printing)
• Printer Error Messages (Printing has stopped – requires...
• Chapter 7 Service
• Ordering Consumables and Supplies
• Requesting Printer Service
• Appendix A L7032 Specifications
• Appendix B PGL Setup Commands
• Appendix C VGL Setup Commands
• Appendix D Downloading Software
• Appendix E Downloading Printable Files (PGL/VGL Only)
• Adding the Download Header
• TrueType Fonts
View All
http://www.printronix.com/
Table of contents
View All
• Overview
• About This Manual
• Warnings And Special Information
• Features
• On-Line Form And Label Generation
• Variable Bar Codes
• Expanded and Compressed Print
• Rotated Alphanumerics
• Logos
• Reversed and Shaded Print
• Automatic Increment/Decrement Capability
• Multinational and International Character Sets
• New Or Different Features For The VGL
• Modes Of Operation
• Normal Mode
• Graphics Mode
• Extended Graphics Mode
• Extended Graphics/High Resolution Mode
• Configuring VGL With The Control Panel
• Commands
• Modes Of Operation
• VGL Command Standards
• Special Function Control Code (SFCC)
• Command Sequence
• Command Parameters
• Brackets
• Spaces
• Comma
• Terminator
• Character Height, Width, And Intercharacter Spacing
• Normal Mode
• Graphics Mode
• Data Positioning
• Command Codes
• Graphics Mode Enable Commands
• Standard Graphics Commands
• Extended Graphics Commands
• Extended Graphics/High Resolution Commands
• Alphanumerics
• Boxes
• Carriage Return
• Character Height
• Character Width
• Character Type
• Compressed Print
• Dark Print
• Descending Characters
• Direct Printer Commands
• Dot Slew
• Duplication, Horizontal
• Duplication, Horizontal (Version II)
• Duplication, Vertical
• Duplication, Vertical (Version II)
• Dynamic Form Commands
• Electronic Vertical Format Unit (EVFU)
• Emphasized Print
• Emulation Switch
• Font Load
• Font, Selecting Default (Version II)
• Fonts, Rotatable
• Fonts, Compressed Print Density
• Form Feed
• Form Length
• Forms Construction
• Forms, Creating Dynamic (Version II)
• Forms, Deleting Dynamic (Version II)
• Forms, Executing Dynamic (Version II)
• Forms, Listing Dynamic (Version II)
• Forms, Predefined (Version II)
• Forms, Resetting Dynamic (Version II)
• Free Format (Enable/Disable)
• Free Format Enable, Non-Graphics
• Free Format Disable, Non-Graphics
• Graphics Mode Enable
• Graphics Mode Disable
• Hex Dump
• Ignore Data
• Interrupt
• Justification, Vertical
• Line Feed
• Line Slew
• Line Spacing
• Lines, Dashed
• Lines, Solid
• Logo Generation (Version II)
• Logo, PCX
• Logo, TIFF
• Page, Controlling Paper Options (Version II)
• Passing Hex Values
• Pixel Expansion (Version II)
• Plotting Bitmap Images
• Plotting Graphics (Columns)
• Plotting Graphics (Rows)
• Reset
• Reverse Print
• Scaling
• Shading
• Shading Mask
• Special Function Control Code Change
• Symbols, Creating Standard User Defined
• Symbols, Creating Expanded User Defined
• Symbols, Printing
• Tab, Horizontal
• Tab, Vertical
• Underlined Print
• Wait For Online
• Bar Codes
• Overview
• Examples
• Bar Code Size/Height Requirements
• Bar Code Command Format
• Standard Bar Code Command Format
• IBARC, (Version II) Bar Code Command Format
• Bar Codes
• Australian 4-State
• BC412 Barcode
• Codabar
• Data Matrix
• German Interleaved 2/5
• Identicon
• Interleaved 2/5
• Maxicode
• MSI
• PDF417
• Planet
• POSTNET
• Royal Mail
• Telepen
• UCC/EAN-128
• UPC-A
• UPC-E
• UPCSHIP
• Exercises And Examples
• Practice Using VGL
• Practice Graphic Exercise - Normal Resolution
• Practice Graphic Exercise - High Resolution
• Form Example
• Page Layout Considerations
• Planning The Form Layout
• Label Example
• Solving Program Errors
• Multinational And International Character Sets
• Multinational Character Sets
• Character Addresses
• Making Character Substitutions
• Accessing Characters And Character Sets
• Data Bit
• Power-Up Character Set Selection
• Building A Character Translation Table
• Resetting the Character Set
• User-Defined Set Command
• Character Set Selection Command
• Selecting An ISO Character Set
• Multinational Character Set Charts
• International Character Sets
• Error Codes
• The Purpose Of Error Codes
• Error Codes
• Standard ASCII Character Set
• Shading Masks
• Selecting Masks
• Grid Samples
• Page Boundaries
• Paper Selection And Maximum Values
• Setting Top/Bottom Margins
• Setting Left Margins
• PTX_SETUP Option
• Overview
• The PTX_SETUP Commands
• Commands
• VGL Command Support on L7032 Printers
• Glossary
• Contact Information
• Printronix Customer Support Center
• Printronix Supplies Department
• Corporate Offices
View All
http://www.printronix.com/
Table of contents
View All
• Basic Setup
• Choose a Space for the Printer
• Location of Printer Components
• Front of the Printer
• The Operator Panel
• Components on the Right Side of the Printer
• Components on the Left Side of the Printer
• Components on the Back of the Printer
• Components Inside the Printer's Door
• Components Inside the Printer
• Unpack the Cardboard Buffer
• Remove the Orange Tape Strips
• Install the Fuser Cleaning Roller, Ozone Filter, & Power...