Raymarine SportPilot GPS
Product Support Information
http://www.raymarine.com/
Table of contents
View All 
• SportPilot and SportPilot Plus
• Owner’s Handbook
• Chapter 1: Introduction
• About this handbook
• Important Information
• Chapter 2: Operating the SportPilot
• Switching on and off
• Switching on
• Switching off
• Basic operation
• Engaging and disengaging the pilot
• Making course changes
• Adjusting autopilot gain
• Using Navigator (Track) mode
• Chapter 3: Maintenance & Fault Finding
• General maintenance
• Fault finding
• Product support
• Chapter 4: Installing the SportPilot
• Planning the installation
• Installation instructions
• Installing the compass
• Compass location
• Compass mounting
• Compass cabling
• Installing the rudder position sensor – optional
• Linear rudder position sensor – installation (hydraulic...
• Rotary rudder position sensor – installation (hydraulic...
• Providing power for the SportPilot
• Interfacing with NMEA equipment
• Connecting SeaTalk equipment
• Typical SeaTalk connections
• Installing the SportPilot
• Step 1 – Remove the steering wheel
• Step 2 – Mount the torque bracket
• Step 3 – Plug the cables into the SportPilot
• Step 4 – Assemble and secure the SportPilot
• Chapter 5: Compass Calibration
• Important note
• Introduction
• Compass linearization and heading alignment
• Heading alignment without linearizing
View All
http://www.raymarine.com/
Any reference to Raytheon or RTN in this manual should be ... SportPilot & SportPilot+ Quick Reference ... Entering Auto mode (Engaging the ... Steer onto the required ... Turn control stalk to one of the gain ... Adjusting autopilot gain (General ...
