• Guide to the Scanner
• Understanding the Indicators
• Setting up the Scanner
• Preparing for Installation
• Checking the Scanner Location
• Connecting to the Host Computer
• What is SCSI
• Setting the SCSI ID
• Connecting the SCSI Cable (No Connection to Other Port)
• Connecting the Power Cable
• Turning On/Off the Scanner Power
• Initializing the Scanner
• Setting Originals
• Originals
• Recommended Sizes and Weights of Originals
• Difficult to Detect Sizes
• Original Sizes and Scanning Area
• Setting the Original on the Contact Glass
• Setting the Original in the Auto Document Feeder (ADF)
• Scanning Originals
• General Scanning Method
• Manual Scanning
• Troubleshooting
• When Scanning Does not Start
• Error Indicators and Solutions
• Procedures to Correct Errors in the ADF
• Remove the original from the Auto Document Feeder (ADF)
• When Characters Printed by the Endorser are Too Light or...
• Replacing the Ink Ribbon
• Cleaning the Endorser
• Appendices
• Maintenance
• Cleaning the Scanner
• Moving the Scanner
• Disposing of the Scanner
• Options
• Image Processing Unit Type
• Red Lamp Unit Type
• Endorser Unit Type A (Printing Function)
• Specifications
• Scanner Electrical and Hardware Specifications
• DIP Switches
• Functions
• Preview
• Scan
• Scanning Composition
• Binary Scanning/Threshold
• Halftone Scanning
• Gray Scale Scanning
• Area Extraction
• Section Area (Multi-area Settings)
• Auto Photo/Letter
• Resolution
• Brightness
• Contrast
• Gamma Correction
• Binary Filters
• Parameter Download
• Document Size Detection
• Erase Background