X10 AM14A Manuals, Support and Troubleshooting

http://software.x10.com/pub/.../am14ais.pdf

2-Way Appliance Module AM14A (2 ... INSTALLATION AND OPERATING ... Set the black Unit Code dial on the front of the Module to ... Set the red Housecode dial to the same letter as your X-10 ... Make sure the lamp or appliance you want to control is ...

heyu_users : Messages : 2718-2747 of 3767

tech.groups.yahoo.com

heyu_users: heyu users ... Setting up an AM14A module to work with HEYU. ... The AM14A's are marked 'X10... Ed Dippold. etd607. Dec 6, 2008. 1:47 pm. 2723 ...

RC Forums: toggle codes request for IR543

www.remotecentral.com

... previous state of a X10 device, and sending an X10 code depending on its ... modules that use extended codes (e.g. AM14A, LM14A) can be set to report their ...

Light control setup

www.definitivesynergy.com

The CM15A model or X10 Pro model will use the USB port. Click save. ... A two way module (e.g., AM14A) can report back to the computer control module ...

Two Way Lamp Switch

www.blogigo.at

on the powerline in the form of X10 messages to switch the downstairs lamp on ... White 12V The X10 2-Way Appliance Module, model AM14A, is an environmental ...

• Search

simplehomenet.com

Re: Detect X10 device status? Most of the X10 modules are receive only and will not respond to a Status Request. The AM14A and LM14A where two way modules ...

X10 AM14A

X10 AM14A MANUAL

X10 AM14A SUPPORT & TROUBLESHOOTING

document.write("Today's special offer");

X10 AM14A

X10 AM14A MANUAL

X10 AM14A SUPPORT & TROUBLESHOOTING